Engineering Definition Management
adminEngineering Definition Management
GENERAL definitions are mapped only to OP000 — General Cable Definition. Physical operation groups remain mapped to their production operations and machine-specific values.
164Definitions
164Active
10Definition Groups
418Operation Mappings
290Machine Overrides
Master DefinitionsExcel Import / CorrectionBulk Operation AssignmentOperation MappingMachine DefinitionsOperation Coverage
Operation Parameter Register — OP070
Manage the selected operation’s parameters here: add from Engineering Master / Excel, edit values, and remove one or many rows. Machine-specific parameters are administered on Machine Cards.
Excel key: Definition Code. If Operation Codes is blank, the current operation is assigned automatically. Existing codes are updated rather than duplicated.
Operation Parameters (25)
+ ADD PARAMETER
Select rows and delete to permanently remove this operation assignment. Changes persist after leaving and reopening the page.
| Select | # | Code | Parameter Name | Unit | Type | Default Value | Active | Action |
|---|---|---|---|---|---|---|---|---|
| 1 | CURING_TYPE | |||||||
| 2 | I_P | |||||||
| 3 | I_MS | |||||||
| 4 | I_Renk | |||||||
| 5 | I_BO | |||||||
| 6 | I_BT | |||||||
| 7 | I_KO | |||||||
| 8 | I_GC | |||||||
| 9 | I_NET | |||||||
| 10 | I_MNET | |||||||
| 11 | I_MXET | |||||||
| 12 | I_INOMC | |||||||
| 13 | I_IMINC | |||||||
| 14 | I_IMAXC | |||||||
| 15 | I_R | |||||||
| 16 | I_SMIC | |||||||
| 17 | I_SMAC | |||||||
| 18 | I_MA | |||||||
| 19 | I_MAR | |||||||
| 20 | I_NOT | |||||||
| 21 | I_ÇKU | |||||||
| 22 | CURING_TEMP | |||||||
| 23 | LINE_SPEED | |||||||
| 24 | STEAM_N2_PRESSURE | |||||||
| 25 | HOT_SET |
+ ADD OPERATION PARAMETER
Parameter Template Excel Center
Export saved templates, correct them in Excel, then import back. Import updates template records only; APPLY SAVED TEMPLATE publishes values to the operation.
☰OP070 — Engineering Parameter Template (25)CLICK TO EXPAND / EDIT⌄
Manage the permanent OP070 template below. SAVE updates the template; DELETE removes a template row; ADD creates a new standard definition. Applying the saved template replaces the selected operation register only. No other operation or machine parameters are deleted.
| # | Code | Parameter Name | Unit | Type | Sort | Active | Actions |
|---|---|---|---|---|---|---|---|
| 1 | |||||||
| 2 | |||||||
| 3 | |||||||
| 4 | |||||||
| 5 | |||||||
| 6 | |||||||
| 7 | |||||||
| 8 | |||||||
| 9 | |||||||
| 10 | |||||||
| 11 | |||||||
| 12 | |||||||
| 13 | |||||||
| 14 | |||||||
| 15 | |||||||
| 16 | |||||||
| 17 | |||||||
| 18 | |||||||
| 19 | |||||||
| 20 | |||||||
| 21 | |||||||
| 22 | |||||||
| 23 | |||||||
| 24 | |||||||
| 25 |
Add Standard Parameter
The Operation Parameters table above is the only editable operation register. Add, remove or upload parameters there. Machine Parameters belong to Machine Management.
Manage Field Options
Only this field is managed here. ADD · EDIT · REMOVE · SAVE without closing the window.
Generic Code Master
This manages the REAL Generic Code master used by Stock Cards. Add / edit / delete unused codes here; no separate Field Option copy.
Add Generic Code
| Code | Name | Group | Stock Cards | Actions |
|---|---|---|---|---|
| CABLE | Finished Cable | CABLE | 4 |
IN USE · delete protected |
| CMP-LSZH-001 | LSZH Insulation Compound | COMPOUND | 1 |
IN USE · delete protected |
| CMP-LSZH-002 | LSZH Sheathing Compound Black | COMPOUND | 1 |
IN USE · delete protected |
| CMP-PVC-001 | PVC Insulation Compound | COMPOUND | 1 |
IN USE · delete protected |
| CMP-PVC-002 | PVC Sheathing Compound Black | COMPOUND | 1 |
IN USE · delete protected |
| CMP-RUB-001 | EPR Rubber Insulation Compound | COMPOUND | 1 |
IN USE · delete protected |
| CMP-RUB-002 | CPE Rubber Sheathing Compound | COMPOUND | 1 |
IN USE · delete protected |
| CMP-XLPE-001 | XLPE Insulation Compound Natural | COMPOUND | 1 |
IN USE · delete protected |
| CMP-XLPE-002 | XLPE Insulation Compound Black | COMPOUND | 1 |
IN USE · delete protected |
| CMP-XLPE-003 | XLPE Semiconductive Conductor Screen | COMPOUND | 1 |
IN USE · delete protected |
| CMP-XLPE-004 | XLPE Semiconductive Insulation Screen | COMPOUND | 1 |
IN USE · delete protected |
| CONDUCTOR | Cable Conductor | CONDUCTOR | 5 |
IN USE · delete protected |
| GEN-HF-417-REV-7-2015-RANGE-6519 | HF-417-Rev-7/2015-range | Other | 0 | |
| GEN-PVC-A-6AAC | PVC/A | PVC Compound | 1 |
IN USE · delete protected |
| N/A | N/A | GENERAL | 0 | |
| PVC/A IEC 60502-1 | PVC/A IEC 60502-1 | PVC | 1 |
IN USE · delete protected |
| SEMI-CORE | Semi Core / Semi-Finished Code | SEMI_CORE | 1 |
IN USE · delete protected |
| SEMI-FINISHED CABLE | Semi-Finished Cable | Semi-Finished Cable | 0 | |
| SEMI-FINISHED CORE | Semi-Finished Core | Semi-Finished Core | 0 | |
| XLPE IEC 60502-1 | XLPE IEC 60502-1 | Other | 1 |
IN USE · delete protected |
| XLPE-COMPOUND | XLPE Compound | COMPOUND | 1 |
IN USE · delete protected |
Add Selectable Field Option
Save a reusable choice for this data-entry field.
Quick Attribute Add
Add a missing system attribute without leaving this screen.