Engineering Definition Management

admin

Engineering Definition Management

GENERAL definitions are mapped only to OP000 — General Cable Definition. Physical operation groups remain mapped to their production operations and machine-specific values.
164Definitions
164Active
10Definition Groups
418Operation Mappings
290Machine Overrides
Master DefinitionsExcel Import / CorrectionBulk Operation AssignmentOperation MappingMachine DefinitionsOperation Coverage

Operation Parameter Register — OP100

Manage the selected operation’s parameters here: add from Engineering Master / Excel, edit values, and remove one or many rows. Machine-specific parameters are administered on Machine Cards.
DOWNLOAD EXCEL TEMPLATE

Excel key: Definition Code. If Operation Codes is blank, the current operation is assigned automatically. Existing codes are updated rather than duplicated.

Operation Parameters (41)

+ ADD PARAMETER Select rows and delete to permanently remove this operation assignment. Changes persist after leaving and reopening the page.
Select#CodeParameter NameUnitTypeDefault ValueActiveAction
1X_P
2X_MS
3X_R
4X_BO
5X_BT
6X_KO
7X_RKO
8X_TKO
9X_FKO
10BEDDING_THICKNESS
11X_KKO
12X_NET
13X_NMET
14X_NOMC
15X_MINC
16X_MAXC
17X_IET
18X_IMIT
19X_IMAT
20X_MA
21X_INOMC
22X_IMINC
23X_IMAXC
24F_P
25F_MS
26F_R
27F_BO
28F_BT
29F_GC
30F_IET
31F_IMIT
32F_IMAT
33F_INOMC
34F_IMINC
35F_IMAXC
36F_SMIC
37F_SMAC
38F_MA
39F_NOT
40LINE_SPEED
41BEDDING_OD

+ ADD OPERATION PARAMETER

Parameter Template Excel Center

Export saved templates, correct them in Excel, then import back. Import updates template records only; APPLY SAVED TEMPLATE publishes values to the operation.

☰OP100 — Engineering Parameter Template (41)CLICK TO EXPAND / EDIT⌄

Manage the permanent OP100 template below. SAVE updates the template; DELETE removes a template row; ADD creates a new standard definition. Applying the saved template replaces the selected operation register only. No other operation or machine parameters are deleted.

#CodeParameter NameUnitTypeSortActiveActions
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41

Add Standard Parameter

The Operation Parameters table above is the only editable operation register. Add, remove or upload parameters there. Machine Parameters belong to Machine Management.

Manage Field Options

Only this field is managed here. ADD · EDIT · REMOVE · SAVE without closing the window.

Generic Code Master

This manages the REAL Generic Code master used by Stock Cards. Add / edit / delete unused codes here; no separate Field Option copy.

Add Generic Code

FULL GENERIC CODE MASTER
CodeNameGroupStock CardsActions
CABLEFinished CableCABLE4
IN USE · delete protected
CMP-LSZH-001LSZH Insulation CompoundCOMPOUND1
IN USE · delete protected
CMP-LSZH-002LSZH Sheathing Compound BlackCOMPOUND1
IN USE · delete protected
CMP-PVC-001PVC Insulation CompoundCOMPOUND1
IN USE · delete protected
CMP-PVC-002PVC Sheathing Compound BlackCOMPOUND1
IN USE · delete protected
CMP-RUB-001EPR Rubber Insulation CompoundCOMPOUND1
IN USE · delete protected
CMP-RUB-002CPE Rubber Sheathing CompoundCOMPOUND1
IN USE · delete protected
CMP-XLPE-001XLPE Insulation Compound NaturalCOMPOUND1
IN USE · delete protected
CMP-XLPE-002XLPE Insulation Compound BlackCOMPOUND1
IN USE · delete protected
CMP-XLPE-003XLPE Semiconductive Conductor ScreenCOMPOUND1
IN USE · delete protected
CMP-XLPE-004XLPE Semiconductive Insulation ScreenCOMPOUND1
IN USE · delete protected
CONDUCTORCable ConductorCONDUCTOR5
IN USE · delete protected
GEN-HF-417-REV-7-2015-RANGE-6519HF-417-Rev-7/2015-rangeOther0
GEN-PVC-A-6AACPVC/APVC Compound1
IN USE · delete protected
N/AN/AGENERAL0
PVC/A IEC 60502-1PVC/A IEC 60502-1PVC1
IN USE · delete protected
SEMI-CORESemi Core / Semi-Finished CodeSEMI_CORE1
IN USE · delete protected
SEMI-FINISHED CABLESemi-Finished CableSemi-Finished Cable0
SEMI-FINISHED CORESemi-Finished CoreSemi-Finished Core0
XLPE IEC 60502-1XLPE IEC 60502-1Other1
IN USE · delete protected
XLPE-COMPOUNDXLPE CompoundCOMPOUND1
IN USE · delete protected

Add Selectable Field Option

Save a reusable choice for this data-entry field.
MANAGE ALL FIELD OPTIONS

Quick Attribute Add

Add a missing system attribute without leaving this screen.
NEW ATTRIBUTE — create and map to the detected attribute context.
OPEN ATTRIBUTE MANAGEMENT