• Welcome to CableDataSheet, Cable and Wire Technical Consulting Service.
 

News:

You are not allowed to view links. Register or Login
You are not allowed to view links. Register or Login
You are not allowed to view links. Register or Login
You are not allowed to view links. Register or Login
Tacettin İKİZ



Main Menu

RTCA DO-160 – Section 12.0 – Sand and Dust

Started by tacettin, October 31, 2024, 10:17:55 AM

Previous topic - Next topic

tacettin

RTCA DO-160 – Section 12.0 – Sand and Dust

This test determines the resistance of the equipment to the effects of blowing sand and dust where carried by air movement at moderate speeds. The main adverse effects to be anticipated are:

    Penetration into cracks, crevices, bearings and joints, causing fouling and/or clogging of moving parts, relays, filters, etc.
    Formation of electrically conductive bridges.
    Action as nucleus for the collection of water vapor, including secondary effects of possible corrosion.
    Pollution of fluids.

 
Category D: Equipment tested as recommended in the following paragraphs for Dust test is identified as Category D. Such equipment can be installed in locations where the equipment is subjected to blowing dust in the course of normal aircraft operations.
Category S: Equipment tested as recommended in the following paragraphs for both Dust test and Sand test is identified as Category S. Such equipment can be installed in locations where the equipment is subjected to blowing sand and dust in the course of normal aircraft operations. Such location includes cockpit or any other location not intentionally protected against sand and dust exposure.

source : You are not allowed to view links. Register or Login
You are not allowed to view links. Register or Login

Document echo ' ';