CableDataSheet, Cable and Wire Technical Consulting Service

(http://images.techstreet.com/coverart/8/6/6/1167866.jpg)

IEEE 383-2003

IEEE Standard for Qualifying Class 1E Electric Cables and Field Splices for Nuclear Power Generating Stations

full Description

Revision Standard - Active. This standard provides general requirements, direction, and methods for qualifying Class1E electric cables, field splices, factory splices, and factory rework for service in nuclear power generating stations. Categories of cables covered are those used for power, control, and instrumentation services, including signal and communication cables. Field cables, wires, and splices are within the scope of this standard. Cables, wires, and splices within or integral to other devices(e.g., instruments, panels, motors, etc.) should be qualified using the requirements in the applicable device standard or IEEE Std 323TM-1983, as appropriate. However, this standard's requirements may be applied to the wire and cable within these devices.


http://www.techstreet.com/ieee/products/1167866#full

1. Overview
The **IEEE 383-2003** standard specifies the requirements for qualifying Class 1E electric cables and field splices used in nuclear power generating stations. These cables are critical for safety-related functions, ensuring they can operate reliably under normal, abnormal, and accident conditions, including post-accident environments.

Class 1E Definition: Class 1E cables are those associated with nuclear safety functions, such as reactor shutdown, core cooling, and containment integrity.

---

2. Scope and Objectives
This standard establishes:

• Test Procedures: Methods to simulate operational and environmental conditions for qualification.
• Performance Criteria: Acceptance criteria for cable and splice functionality after testing.
• Qualification Requirements: Ensures cables can withstand specified mechanical, electrical, thermal, and radiation conditions.

---

3. Qualification Tests
The standard requires comprehensive testing to qualify Class 1E cables and splices:

• a. Thermal Aging:
  - Simulates the long-term effects of elevated temperatures during normal operation.
  - Aging is performed in an oven at specified temperatures for a duration based on the material's expected life.
• b. Radiation Aging:
  - Exposes cables to radiation levels equivalent to their design basis environment.
  - Ensures the insulation and jacket materials maintain their integrity under radiation exposure.
• c. Mechanical Testing:
  - Includes tensile strength, elongation, and flexibility tests.
  - Verifies the physical durability of cables and splices after aging.
• d. LOCA (Loss-of-Coolant Accident) Testing:
  - Simulates conditions during a nuclear reactor coolant loss.
  - Cables are exposed to high temperatures, pressures, and steam while being monitored for electrical performance.
• e. Electrical Testing:
  - Tests insulation resistance, dielectric strength, and conductor continuity.
  - Ensures cables maintain electrical performance under all conditions.

---

4. Performance Requirements
Class 1E cables and splices must meet the following criteria:

• Thermal Stability: No degradation under prolonged exposure to elevated temperatures.
• Radiation Resistance: Maintains mechanical and electrical properties after radiation exposure.
• Mechanical Integrity: No cracks, splits, or material failures during or after testing.
• Electrical Reliability: Insulation resistance, dielectric strength, and continuity must remain within acceptable limits.

---

5. Applicability and Usage
The IEEE 383-2003 standard applies to:

• Nuclear Power Plants: Ensures safety-related cables and splices perform reliably during normal and accident scenarios.
• Retrofits and Upgrades: Verifies compatibility and reliability of replacement cables in older plants.
• New Designs: Provides qualification guidelines for cables in newly designed facilities.

---

6. Environmental Considerations
Class 1E cables are tested for:

• Temperature Extremes: High operational temperatures and rapid temperature changes.
• Radiation Exposure: Cumulative radiation doses over the cable's lifetime.
• Humidity and Steam: Exposure to high humidity and steam during LOCA simulations.

---

7. Key Highlights of IEEE 383-2003
Test Scope:

• Thermal aging, radiation exposure, and LOCA testing ensure cables meet the stringent requirements of nuclear power plants.
• Mechanical and electrical integrity tests validate the cables' reliability during operational and accident conditions.

Significance:

• Ensures the safety and reliability of critical systems in nuclear facilities.
• Minimizes the risk of cable failures that could compromise reactor safety functions.

---

8. Conclusion
The **IEEE 383-2003 standard** provides a robust framework for qualifying Class 1E electric cables and field splices, ensuring they can withstand the demanding conditions of nuclear power generating stations. By adhering to these rigorous tests, the standard guarantees the reliability and safety of cables in critical applications.

Key Points:

• Comprehensive testing includes thermal, radiation, mechanical, and electrical evaluations.
• Applicable to both existing and new nuclear power plant designs.
• Ensures cables maintain functionality during normal operation and accident scenarios.

References: IEEE 383-2003, nuclear safety standards, and industry best practices.