Document Center List of Standards on Cables
ASTM:
ASTM-B172 - Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Members, for Electrical Conductors
ASTM-B174 - Standard Specification for Bunch-Stranded Copper Conductors for Electrical Conductors
ASTM-B226 - Standard Specification for Cored, Annular, Concentric-Lay-Stranded Copper Conductors
ASTM-B228 - Standard Specification for Concentric-Lay-Stranded Copper-Clad Steel Conductors
ASTM-B229 - Standard Specification for Concentric-Lay-Stranded Copper and Copper-Clad Steel Composite Conductors
ASTM-B232 - Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Reinforced (ACSR)
ASTM-B401 - Standard Specification for Compact Round Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced (ACSR/COMP)
ASTM-B784 - Standard Specification for Modified Concentric-Lay-Stranded Copper Conductors for Use in Insulated Electrical Cables
ASTM-B785 - Standard Specification for Compact Round Modified Concentric-Lay-Stranded Copper Conductors For Use in Insulated Electrical Cables (Withdrawn 1998)
ASTM-B786 - Standard Specification for 19 Wire Combination Unilay-Stranded Aluminum Conductors for Subsequent Insulation
ASTM-B787 - Standard Specification for 19 Wire Combination Unilay-Stranded Copper Conductors for Subsequent Insulation
ASTM-B8 - Standard Specification for Concentric-Lay-Stranded Copper Conductors, Hard, Medium-Hard, or Soft
ASTM-B801 - Standard Specification for Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy for Subsequent Covering or Insulation
ASTM-B802 - Standard Specification for Zinc–5 % Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR)
ASTM-B803 - Standard Specification for High-Strength Zinc–5 % Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors
ASTM-B961 - Standard Specification for Silver Coated Copper and Copper Alloy Stranded Conductors for Electronic Space Application
ASTM-B971 - Standard Specification for Silver-Coated Braid and Ribbon Flat Copper Wire intended for use in Electronic Application
ASTM-B972 - Standard Specification for Nickel-Coated Braid and Ribbon Flat Copper Wire Intended for use in Electronic Application
ASTM-B973 - Standard Specification for Tin-Coated Braid and Ribbon Flat Copper Wire intended for use in Electronic Application
ASTM-D232 - Method of Test for Estimating Hard Scoured Wool in Wool in the Grease (Mill Scale Operations) (Withdrawn 1942) No Replacement
ASTM-D574 - Specification for Ozone-Resisting Insulation for Wire and Cable (Withdrawn 1983)
ASTM-E2181 - Standard Specification for Compacted Mineral-Insulated, Metal-Sheathed, Noble Metal Thermocouples and Thermocouple Cable
BSI:
BS-2562-1 - Cable sealing boxes for oil immersed transformers. Boxes for voltages up to and including 11 kV
BS-2G-233 - Specification for electric cables for general airframe or equipment interconnect use (135C), extruded insulation
BS-4553 - Specification for 600/1000 V PVC-insulated single-phase split concentric cables with copper conductors for electricity supply
BS-4553-1 - Specification for 600/1000 V single-phase split concentric electric cables
BS-4553-2 - Specification for 600/1000 V single-phase split concentric electric cables
BS-4553-3 - Specification for 600/1000 V single-phase split concentric electric cables
BS-4727-2-GROUP-08 - Electric Cables, Glossary of Electrotechnical, Power, Telecommunication, Electronics,
BS-5099 - Electric cables. Voltage levels for spark testing
BS-5308-1 - Instrumentation Cables, Specification for Polyethylene Insulated Cables
BS-5308-2 - Part 2: Specification for Pvc Insulated Cables, Instrumentation Cables
BS-5372 - Specification for Dimensions of cable terminations for multi-core extruded solid dielectric insulated distribution cables of rated voltages 600/1000 V and 1900/3300 V having copper or aluminium conductors
BS-5467 - Electric cables. Thermosetting insulated, armoured cables of rated voltages of 600/1 000 V and 1 900/3 300 V for fixed installations. Specification
BS-6004 - Electric cables. PVC insulated and PVC sheathed cables for voltages up to and including 300/500 V, for electric power and lighting
BS-6007 - Electric cables. Single core unsheathed heat resisting cables for voltages up to and including 450/750 V, for internal wiring
BS-6081 - Specification for terminations for mineral-insulated cables
BS-6141 - Specification for insulated cables and flexible cords for use in high temperature zones
BS-6195 - Electric cables. Rubber or silicone rubber insulated flexible cables and cords for coil end leads
BS-6207-2 - Mineral insulated cables with a rated voltage not exceeding 750 V. Terminations
BS-6207-3 - Mineral insulated cables with a rated voltage not exceeding 750 V
BS-6231 - Electric cables. Single core PVC insulated flexible cables of rated voltage 600/1000 V for switchgear and controlgear wiring
BS-6346 - Electric Cables, Pvc Insulated, Armoured Cables for Voltagesof 600/1000 V & 1900/3300
BS-6351-1 - Electric surface heating
BS-6360 - Specification for Conductors in Insulated Cables & Cords
BS-6387 - Test method for resistance to fire of cables required to maintain circuit integrity under fire conditions
BS-6425-1 - Test on gases evolved during the combustion of materials from cables. Method for determination of amount of halogen acid gas evolved during combustion of polymeric materials taken from cables
BS-6435 - Specification for unfilled enclosures for the dry termination of HV cables for transformers and reactors
BS-6480 - Specification for impregnated paper-insulated lead or lead alloy sheathed electric cables of rated voltages up to and including 33000 V
BS-6480-1 - Specification for impregnated paper-insulated cables for electricity supply.
BS-6485 - PVC-covered conductors for overhead power lines
BS-6500 - Electric cables. Flexible cords rated up to 300/500 V, for use with appliances and equipment intended for domestic, office and similar environments
BS-6513-6 - Wideband Cabled Distribution Systems, Specification for Safety Requirements
BS-6622 - Electric cables. Armoured cables with thermosetting insulation for rated voltages from 3.8/6.6 kV to 19/33 kV. Requirements and test methods
BS-6708 - Flexible cables for use at mines and quarries
BS-6724 - Electric cables. Thermosetting insulated, armoured cables of rated voltages of 600/1 000 V and 1 900/3 300 V for fixed installations, having low emission of smoke and corrosive gases when affected by fire. Specification
BS-6883 - Elastomer insulated cables for fixed wiring in ships and on mobile and fixed offshore units. Requirements and test methods
BS-7211 - Electric cables. Thermosetting insulated and thermoplastic sheathed cables for voltages up to and including 450/750 V for electric power and lighting and having low emission of smoke and corrosive gases when affected by fire
BS-7540 - CENELEC Hd 516 S1Guide To Use of Cables With a Rated Voltagenot Exceeding 450/750 Vgiv
BS-7540-1 - Electric cables. Guide to use for cables with a rated voltage not exceeding 450/750 V. General guidance
BS-7540-2 - Electric cables. Guide to use for cables with a rated voltage not exceeding 450/750 V. Harmonized cable types from HD 21 and HD 22
BS-7540-3 - Electric cables. Guide to use for cables with a rated voltage not exceeding 450/750 V. National standard cables not included in HD 21 and HD 22
BS-7622-2 - Test Procedure and Requirements
BS-7629 - Specification for thermosetting insulated cables with limited circuit integrity when affected by fire
BS-7629-1 - Electric cables. Specification for 300/500 V fire resistant, screened, fixed installation cables having low emission of smoke and corrosive gases when affected by fire
BS-7629-1-TC - Electric cables. Specification for 300/500 V fire resistant, screened, fixed installation cables having low emission of smoke and corrosive gases when affected by fire
BS-7629-2 - Specification for 300/500 V fire resistant electric cables having low emission of smoke and corrosive gases when affected by fire. Multipair cables
BS-7769-1.1 - Electric cables. Calculation of the current rating. Current rating equations (100% load factor) and calculation of losses. General
BS-7769-2-2.1 - Thermal Resistance - Calculation of Thermal Resistance
BS-7769-3.1 - Electric cables. Calculation of the current rating. Sections on operating conditions. Reference operating conditions and selection of cable type
BS-7835 - Electric cables. Armoured cables with thermosetting insulation for rated voltages from 3.8/6.6 kV to 19/33 kV having low emission of smoke and corrosive gases when affected by fire. Requirements and test methods
BS-7846 - Electric cables. Thermosetting insulated, armoured, fire-resistant cables of rated voltage 600/1 000 V for fixed installations, having low emission of smoke and corrosive gases when affected by fire. Specification
BS-7870-1 - LV and MV polymeric insulated cables for use by distribution and generation utilities
BS-7870-2 - LV and MV polymeric insulated cables for use by distribution and generation utilities
BS-7870-3.1 - LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kV. PVC and XLPE insulated combined neutral and earth copper wire concentric cables with copper or aluminium conductors
BS-7870-3.10 - LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kV
BS-7870-3.11 - LV and MV polymeric insulated cables for use by distribution and generation utilities
BS-7870-3.12 - LV and MV polymeric insulated cables for use by distribution and generation utilities
BS-7870-3.2 - Lv & Mv Polymeric Insulated Cables for Use by Distribution &Generation Utilities, Spec
BS-7870-3.20 - LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kV
BS-7870-3.21 - LV and MV polymeric insulated cables for use by distribution and generation utilities
BS-7870-3.22 - LV and MV polymeric insulated cables for use by distribution and generation utilities
BS-7870-3.4 - LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kV. XLPE and HEPR insulated combined neutral and earth aluminium or copper wire concentric cables with solid aluminium conductors
BS-7870-3.40 - LV and MV polymeric insulated cables for use by distribution and generation utilities
BS-7870-3.40-TC - Tracked Changes. LV and MV polymeric insulated cables for use by distribution and generation utilities
BS-7870-3.50 - LV and MV polymeric insulated cables for use by distribution and generation utilities
BS-7870-3.50-TC - Tracked Changes. LV and MV polymeric insulated cables for use by distribution and generation utilities
BS-7870-4.10 - LV and MV polymeric insulated cables for use by distribution and generation utilities
BS-7870-4.11 - LV and MV polymeric insulated cables for use by distribution and generation utilities
BS-7870-4.12 - Single Cor 11 Kv Copper Foil Sheath Cables
BS-7870-4.13 - Single Core 33 Kv Copper Wire/Foil Sheath Cables
BS-7870-4.20 - LV and MV polymeric insulated cables for use by distribution and generation utilities
BS-7870-5 - LV and MV polymeric insulated cables for use by distribution and generation utilities
BS-7870-6.1 - LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for 0.6/1 kV and 1.9/3.3 kV power cables with special fire performance for use in power stations. PVC insulated and PVC sheathed cables
BS-7870-6.2 - LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for 0.6/1 kV and 1.9/3.3 kV power cables with special fire performance for use in power stations
BS-7870-6.3 - LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for 0.6/1 kV and 1.9/3.3 kV power cables with special fire performance for use in power stations
BS-7870-7.1 - LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for power cables having rated voltages of 3.8/6.6 kV and 6.35/11 kV with special fire performance for use in power stations. Single core and 3-core cables with halogenated materials and with aluminium or steel wire armouring
BS-7870-7.2 - LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for power cables having rated voltages of 3.8/6.6 kV and 6.35/11 kV with special fire performance for use in power stations. Single-core and 3-core cables with halogen-free materials and with aluminium or steel wire armouring
BS-7870-8.1 - LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for multicore and multipair cables for installation above and below ground
BS-7870-8.2 - LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for multicore and multipair cables for installation above and below ground
BS-7870-8.3 - LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for multicore and multipair cables for installation above and below ground
BS-7870-8.4 - LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for multicore and multipair cables for installation above and below ground
BS-7870-8.5 - LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for multicore and multipair cables for installation above and below ground
BS-7870-8.6 - LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for multicore and multipair cables for installation above and below ground
BS-7888-1 - LV and MV accessories for power cables with rated voltage from 0.6/1 kV (Um=1.2 kV) up to and including 20.8/36 kV (Um=42 kV). General
BS-7888-2 - LV and MV accessories for power cables with rated voltage from 0.6/1 kV (Um=1.2 kV) up to and including 20.8/36 kV (Um=42 kV). Methods of test
BS-7888-4.1 - Test requirements on accessories for use on power cables of rated voltage from 3,6/6(7,2) kV up to 20,8/36(42) kV
BS-7888-4.2 - Test requirements on accessories for use on power cables of rated voltage from 3,6/6(7,2) kV up to 20,8/36(42) kV
BS-7889 - Electric cables. Thermosetting insulated, non-armoured cables with a voltage of 600/1 000 V, for fixed installations
BS-7894 - MV impregnated paper insulated distribution cables of rated voltages of 3.8/6.6 kV to 19/33 kV
BS-7912 - Power cables with XLPE insulation and metal sheath, and their accessories, for rated voltages from 66 kV (Um = 72.5 kV) to 132 kV (Um = 145 kV)
BS-7917 - Elastomer insulated fire resistant (limited circuit integrity) cables for fixed wiring in ships and on mobile and fixed offshore units. Requirements and test methods
BS-7919 - Electric cables. Flexible cables rated up to 450/750V, for use with appliances and equipment intended for industrial and similar environments
BS-7933-1 - Electric cables. Accessories. Material characterisation. Fingerprinting and type tests for resinous compounds
BS-7933-2 - Electric cables. Accessories. Material characterisation. Fingerprinting and type tests for heat shrinkable components for low voltage applications
BS-7933-3 - Electric cables. Accessories. Material characterisation. Fingerprinting for heat shrinkable components for medium voltage applications from 3,6/6 (7,2) kV up to 20,8/36 (42) kV
BS-7933-4 - Electric cables. Accessories. Material characterisation. Fingerprinting for cold shrinkable components for low and medium voltage applications up to 20,8/36 (42) kV
BS-7970 - Electric cables. Metal foil and longitudinally welded aluminium sheath constructions of power cables having XLPE insulation for rated voltages from 66 kV (Um = 72.5 kV) to 132 kV (Um = 145 kV)
BS-801 - Specification for composition of lead and lead alloy sheaths of electric cables
BS-8434-1 - Methods of test for assessment of the fire integrity of electric cables. Test for unprotected small cables for use in emergency circuits. BS EN 50200 with addition of water spray
BS-8434-2 - Methods of test for assessment of the fire integrity of electric cables
BS-8436 - Electric cables. Specification for 300/500 V screened electric cables having low emission of smoke and corrosive gases when affected by fire, for use in walls, partitions and building voids. Multicore cables
BS-8491 - Method for assessment of fire integrity of large diameter power cables for use as components for smoke and heat control systems and certain other active fire safety systems
BS-8512 - Electric cables. Code of practice for the storage, handling, installation and disposal of cables on wooden drums
BS-8573 - Electric cables. Thermosetting insulated, non-armoured cables with a voltage of 600/1 000V, for fixed installations, having low emissions of smoke and corrosive gases when affected by fire
BS-8592 - Electric cables. Thermosetting insulated, non-armoured, fire-resistant, single core non-sheathed cables of rated voltage 450/750 V, having low emission of smoke and corrosive gases when affected by fire. Specification
BS-8602 - Method for assessment of fire integrity of cast resin busbar trunking systems for the safety critical power distribution to life safety and fire fighting systems
BS-EN-10257-1 - Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables
BS-EN-10257-2 - Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables
BS-EN-13501-6 - Fire classification of construction products and building elements
BS-EN-1366-11 - Fire resistance tests for service installations
BS-EN-50143 - Cables for signs and luminous-discharge-tube installations operating from a no-load rated output voltage exceeding 1000 V but not exceeding 10000 V
BS-EN-50167 - Sectional specification for horizontal floor wiring cables with a common overall screen for use in digital communication
BS-EN-50168 - Sectional Specification for Work Area Wiring Cables With a Common Overall Screen for U
BS-EN-50200 - Method of test for resistance to fire of unprotected small cables for use in emergency circuits
BS-EN-50214 - Flat flexible cables
BS-EN-50214-TC - Tracked Changes. Flat flexible cables
BS-EN-50264-1 - Railway applications. Railway rolling stock power and control cables having special fire performance
BS-EN-50264-2 - Railway Applications, Railway Rolling Stock Cables Having Special Fire Performance, St
BS-EN-50264-2-1 - Railway applications. Railway rolling stock power and control cables having special fire performance
BS-EN-50264-2-2 - Railway applications. Railway rolling stock power and control cables having special fire performance
BS-EN-50264-3 - Railway Applications, Railway Rolling Stock Cables Having Special Fire Performance, St
BS-EN-50264-3-1 - Railway applications. Railway rolling stock power and control cables having special fire performance
BS-EN-50264-3-2 - Railway applications. Railway rolling stock power and control cables having special fire performance
BS-EN-50265-1 - Common test methods for cables under fire conditions. Test for resistance to vertical flame propagation for a single insulated conductor or cable
BS-EN-50265-2-1 - Common test methods for cables under fire conditions. Test for resistance to vertical flame propagation for a single insulated conductor or cable. Procedures
BS-EN-50265-2-2 - Part 2: Procedures, Section 2: Diffusion Flame
BS-EN-50266-1 - Common test methods for cables under fire conditions. Test for vertical flame spread of vertically-mounted bunched wires or cables
BS-EN-50266-2-1 - Procedures - Category a F/R
BS-EN-50266-2-2 - Common Test Methods for Cables Under Fire Conditions, Test for Vertical Flame Spread O
BS-EN-50266-2-3 - Common Test Methods for Cables Under Fire Conditions, Test for Vertical Flame Spread O
BS-EN-50266-2-4 - Common Test Methods for Cables Under Fire Conditions, Test for Vertical Flame Spread O
BS-EN-50266-2-5 - Common Test Methods for Cables Under Fire Conditions, Test for Vertical Flame Spread O
BS-EN-50267-1 - Common test methods for cables under fire conditions. Tests on gases evolved during combustion of materials from cables
BS-EN-50267-2-1 - Common test methods for cables under fire conditions. Tests on gases evolved during combustion of materials from cables. Procedures
BS-EN-50267-2-2 - Common test methods for cables under fire conditions. Tests on gases evolved during combustion of materials from cables. Procedures
BS-EN-50267-2-3 - Common test methods for cables under fire conditions. Tests on gases evolved during combustion of materials from cables. Procedures
BS-EN-50268-1 - Common test methods for cables under fire conditions. Measurement of smoke density of cables burning under defined conditions
BS-EN-50268-2 - Common test methods for cables under fire conditions. Measurement of smoke density of cables burning under defined conditions
BS-EN-50289-3-1 - Communication cables. Specifications for test methods. Mechanical test methods
BS-EN-50289-3-11 - Communication cables. Specifications for test methods. Mechanical test methods
BS-EN-50289-3-12 - Communication cables. Specifications for test methods. Mechanical test methods
BS-EN-50289-3-16 - Communication cables. Specifications for test methods. Mechanical test methods
BS-EN-50289-3-4 - Communication cables. Specifications for test methods. Mechanical test methods
BS-EN-50289-3-5 - Communication cables. Specifications for test methods. Mechanical test methods
BS-EN-50289-3-6 - Communication cables. Specifications for test methods. Mechanical test methods
BS-EN-50289-3-7 - Communication cables. Specifications for test methods. Mechanical test methods
BS-EN-50289-3-8 - Communication cables. Specifications for test methods
BS-EN-50289-3-9 - Communication cables. Specifications for test methods. Mechanical test methods
BS-EN-50289-4-1 - Communication cables. Specifications for test methods. Environmental test methods
BS-EN-50289-4-2 - Communication cables. Specifications for test methods. Environmental test methods
BS-EN-50289-4-9 - Communication cables. Specifications for test methods. Environmental test methods
BS-EN-50290-1-1 - Communication cables.
BS-EN-50290-2-20-TC - Tracked Changes. Communication cables
BS-EN-50290-2-21 - Communication cables
BS-EN-50290-4-1 - Communication cables
BS-EN-50290-4-1-TC - Tracked Changes. Communication cables
BS-EN-50290-4-2 - Communication cables
BS-EN-50305 - Railway applications. Railway rolling stock cables having special fire performance. Test methods
BS-EN-50306-1 - Railway applications. Railway rolling stock cables having special fire performance. Thin wall
BS-EN-50306-2 - Railway applications. Railway rolling stock cables having special fire performance. Thin wall
BS-EN-50306-3 - Railway applications. Railway rolling stock cables having special fire performance. Thin wall
BS-EN-50306-4 - Railway applications. Railway rolling stock cables having special fire performance. Thin wall
BS-EN-50334 - Marking by inscription for the identification of cores of electric cables
BS-EN-50341-2-7-TC - Tracked Changes. Overhead electrical lines exceeding AC 1 kV
BS-EN-50355 - Railway applications. Railway rolling stock cables having special fire performance. Guide to use
BS-EN-50356 - Method for spark testing of cables
BS-EN-50382-1 - Railway applications. Railway rolling stock high temperature power cables having special fire performance
BS-EN-50382-2 - Railway applications. Railway rolling stock high temperature power cables having special fire performance
BS-EN-50395 - Electrical test methods for low voltage energy cables
BS-EN-50396 - Non electrical test methods for low voltage energy cables
BS-EN-50399 - Common test methods for cables under fire conditions. Heat release and smoke production measurement on cables during flame spread test. Test apparatus, procedures, results
BS-EN-50525-1 - Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U)
BS-EN-50525-2-11 - Electric cables. Low voltage energy cables of rated voltages up to and including 450/750V (U0/U)
BS-EN-50525-2-12 - Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U)
BS-EN-50525-2-21 - Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U)
BS-EN-50525-2-22 - Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U)
BS-EN-50525-2-31 - Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U)
BS-EN-50525-2-41 - Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U)
BS-EN-50525-2-42 - Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U)
BS-EN-50525-2-51 - Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U)
BS-EN-50525-2-71 - Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U)
BS-EN-50525-2-72 - Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U)
BS-EN-50525-2-81 - Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U)
BS-EN-50525-2-82 - Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U)
BS-EN-50525-2-83 - Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U)
BS-EN-50525-3-11 - Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U)
BS-EN-50525-3-21 - Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U)
BS-EN-50525-3-31 - Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U)
BS-EN-50525-3-41 - Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U)
BS-EN-50565-1 - Electric cables. Guide to use for cables with a rated voltage not exceeding 450/750 V (U0/U)
BS-EN-50565-2 - Electric cables. Guide to use for cables with a rated voltage not exceeding 450/750 V (U0/U)
BS-EN-50575 - Power, control and communication cables. Cables for general applications in construction works subject to reaction to fire requirements
BS-EN-50576 - Electric cables. Extended application of test results for reaction to fire
BS-EN-50576-TC - Tracked Changes. Electric cables. Extended application of test results for reaction to fire
BS-EN-50577 - Electric cables. Fire resistance test for unprotected electric cables (P classification)
BS-EN-50618 - Electric cables for photovoltaic systems (BT(DE/NOT)258)
BS-EN-50620 - Electric cables. Charging cables for electric vehicles
BS-EN-50620-TC - Electric cables. Charging cables for electric vehicles
BS-EN-50642 - Cable management systems. Test method for content of halogens
BS-EN-50655-1 - Electric cables. Accessories. Material characterization
BS-EN-50655-1-TC - Tracked Changes. Electric cables. Accessories. Material characterization.Fingerprinting for resinous compounds.
BS-EN-50655-2 - Electric cables. Accessories. Material characterization
BS-EN-50655-3 - Electric cables. Accessories. Material characterization
BS-EN-60228 - Conductors of insulated cables
BS-EN-60229 - Electric cables. Tests on extruded oversheaths with a special protective function
BS-EN-60230 - Impulse tests on cables and their accessories
BS-EN-60332-1-1 - Tests on electric and optical fibre cables under fire conditions
BS-EN-60332-1-2 - Tests on electric and optical fibre cables under fire conditions
BS-EN-60332-1-3 - Tests on electric and optical fibre cables under fire conditions
BS-EN-60332-2-1 - Tests on electric and optical fibre cables under fire conditions
BS-EN-60332-2-2 - Tests on electric and optical fibre cables under fire conditions
BS-EN-60332-3-10 - Tests on electric and optical fibre cables under fire conditions
BS-EN-60332-3-21 - Tests on electric and optical fibre cables under fire conditions
BS-EN-60332-3-22 - Tests on electric and optical fibre cables under fire conditions
BS-EN-60332-3-23 - Tests on electric and optical fibre cables under fire conditions
BS-EN-60332-3-24 - Tests on electric and optical fibre cables under fire conditions
BS-EN-60332-3-25 - Tests on electric and optical fibre cables under fire conditions
BS-EN-60702-1 - Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V
BS-EN-60702-2 - Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V
BS-EN-60702-3 - Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V
BS-EN-60708 - Low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath
BS-EN-60719 - Calculation for the lower and upper limits for the average outer dimensions of cables with circular copper conductors and of rated voltages up to and including 450/750 V
BS-EN-60754-1 - Test on gases evolved during combustion of materials from cables
BS-EN-60754-2 - Test on gases evolved during combustion of materials from cables
BS-EN-60811-100 - Electric and optical fibre cables. Test methods for non-metallic materials
BS-EN-60811-201 - Electric and optical fibre cables. Test methods for non-metallic materials
BS-EN-60811-202 - Electric and optical fibre cables. Test methods for non-metallic materials
BS-EN-60811-203 - Electric and optical fibre cables. Test methods for non-metallic materials
BS-EN-60811-301 - Electric and optical fibre cables. Test methods for non-metallic materials
BS-EN-60811-302 - Electric and optical fibre cables. Test methods for non-metallic materials
BS-EN-60811-401 - Electric and optical fibre cables. Test methods for non-metallic materials
BS-EN-60811-402 - Electric and optical fibre cables. Test methods for non-metallic materials
BS-EN-60811-403 - Electric and optical fibre cables. Test methods for non-metallic materials
BS-EN-60811-404 - Electric and optical fibre cables. Test methods for non-metallic materials
BS-EN-60811-405 - Electric and optical fibre cables. Test methods for non-metallic materials
BS-EN-60811-406 - Electric and optical fibre cables. Test methods for non-metallic materials
BS-EN-60811-407 - Electric and optical fibre cables. Test methods for non-metallic materials
BS-EN-60811-408 - Electric and optical fibre cables. Test methods for non-metallic materials
BS-EN-60811-409 - Electric and optical fibre cables. Test methods for non-metallic materials
BS-EN-60811-4-1 - Insulating and sheathing materials of electric and optical cables. Common test methods
BS-EN-60811-410 - Electric and optical fibre cables. Test methods for non-metallic materials
BS-EN-60811-411 - Electric and optical fibre cables. Test methods for non-metallic materials
BS-EN-60811-412 - Electric and optical fibre cables. Test methods for non-metallic materials
BS-EN-60811-4-2 - Insulating and sheathing materials of electric and optical cables. Common test methods
BS-EN-60811-501 - Electric and optical fibre cables. Test methods for non-metallic materials
BS-EN-60811-502 - Electric and optical fibre cables. Test methods for non-metallic materials
BS-EN-60811-503 - Electric and optical fibre cables. Test methods for non-metallic materials
BS-EN-60811-504 - Electric and optical fibre cables. Test methods for non-metallic materials
BS-EN-60811-505 - Electric and optical fibre cables. Test methods for non-metallic materials
BS-EN-60811-506 - Electric and optical fibre cables. Test methods for non-metallic materials
BS-EN-60811-507 - Electric and optical fibre cables. Test methods for non-metallic materials
BS-EN-60811-508 - Electric and optical fibre cables. Test methods for non-metallic materials
BS-EN-60811-509 - Electric and optical fibre cables. Test methods for non-metallic materials
BS-EN-60811-510 - Electric and optical fibre cables. Test methods for non-metallic materials
BS-EN-60811-511 - Electric and optical fibre cables. Test methods for non-metallic materials
BS-EN-60811-512 - Electric and optical fibre cables. Test methods for non-metallic materials
BS-EN-60811-513 - Electric and optical fibre cables. Test methods for non-metallic materials
BS-EN-60811-601 - Electric and optical fibre cables. Test methods for non-metallic materials
BS-EN-60811-602 - Electric and optical fibre cables. Test methods for non-metallic materials
BS-EN-60811-603 - Electric and optical fibre cables. Test methods for non-metallic materials
BS-EN-60811-604 - Electric and optical fibre cables. Test methods for non-metallic materials
BS-EN-60811-605 - Electric and optical fibre cables. Test methods for non-metallic materials
BS-EN-60811-606 - Electric and optical fibre cables. Test methods for non-metallic materials
BS-EN-60811-607 - Electric and optical fibre cables. Test methods for non-metallic materials
BS-EN-60885-3 - Electrical test methods for electric cables
BS-EN-60885-3-TC - Tracked Changes. Electrical test methods for electric cables
BS-EN-61034-1 - Measurement of smoke density of cables burning under defined conditions
BS-EN-61034-2 - Measurement of smoke density of cables burning under defined conditions
BS-EN-61138 - Cables for portable earthing and short-circuiting equipment
BS-EN-61394 - Overhead lines. Requirements for greases for aluminium, aluminium alloy and steel bare conductors
BS-EN-61442 - Test methods for accessories for power cables with rated voltages from 6 kV (Um = 7,2 kV) up to 36 kV (Um = 42 kV)
BS-EN-62230 - Electric cables. Spark-test method
BS-EN-62491 - Industrial systems, installations and equipment and industrial products. Labelling of cables and cores
BS-EN-63075 - Superconducting AC power cables and their accessories for rated voltages from 6 kV to 500 kV. Test methods and requirements
BS-EN-IEC-60228 - Conductors of insulated cables
BS-EN-IEC-60230 - Impulse tests on cables and their accessories
BS-EN-IEC-60230-TC - Tracked Changes. Impulse tests on cables and their accessories
BS-EN-IEC-60331-1 - Tests for electric cables under fire conditions. Circuit integrity
BS-EN-IEC-60332-3-10 - Tests on electric and optical fibre cables under fire conditions
BS-EN-IEC-60332-3-10-TC - Tracked Changes. Tests on electric and optical fibre cables under fire conditions
BS-EN-IEC-60332-3-21 - Tests on electric and optical fibre cables under fire conditions
BS-EN-IEC-60332-3-21-TC - Tracked Changes. Tests on electric and optical fibre cables under fire conditions
BS-EN-IEC-60332-3-22 - Tests on electric and optical fibre cables under fire conditions
BS-EN-IEC-60332-3-22-TC - Tracked Changes. Tests on electric and optical fibre cables under fire conditions
BS-EN-IEC-60332-3-23 - Tests on electric and optical fibre cables under fire conditions
BS-EN-IEC-60332-3-23-TC - Tracked Changes. Tests on electric and optical fibre cables under fire conditions
BS-EN-IEC-60332-3-24 - Tests on electric and optical fibre cables under fire conditions
BS-EN-IEC-60332-3-24-TC - Tracked Changes. Tests on electric and optical fibre cables under fire conditions
BS-EN-IEC-60754-3 - Test on gases evolved during combustion of materials from cables
BS-EN-IEC-60794-1-310 - Optical fibre cables
BS-EN-IEC-60799 - Electrical accessories. Cord sets and interconnection cord sets
BS-EN-IEC-60799-TC - Tracked Changes. Electrical accessories. Cord sets and interconnection cord sets
BS-EN-IEC-61238-1-1 - Compression and mechanical connectors for power cables
BS-EN-IEC-61238-1-2 - Compression and mechanical connectors for power cables
BS-EN-IEC-61238-1-3 - Compression and mechanical connectors for power cables
BS-EN-IEC-61340-4-3-TC - Tracked Changes. Electrostatics
BS-EN-IEC-63355 - Cable management systems. Test method for content of halogens
BS-EN-IEC-63355-TC - Tracked Changes. Cable management systems. Test method for content of halogens
BS-HD-629.1-S3 - Test requirements for accessories for use on power cables of rated voltage from 3,6/6(7,2) kV up to 20,8/36(42) kV
BS-HD-629.2-S3 - Test requirements for accessories for use on power cables of rated voltage from 3,6/6(7,2) kV up to 20,8/36(42) kV
BS-IEC-60183 - Guidance for the selection of high-voltage A.C. cable systems
BS-IEC-60230 - Impulse tests on cables and their accessories
BS-IEC-60287-1-1 - Electric cables. Calculation of the current rating
BS-IEC-60287-1-1-TC - Tracked Changes. Electric cables. Calculation of the current rating
BS-IEC-60287-1-3-TC - Tracked Changes. Electric cables. Calculation of the current rating
BS-IEC-60287-2-1 - Electric cables. Calculation of the current rating
BS-IEC-60287-2-1-TC - Tracked Changes. Electric cables. Calculation of the current rating
BS-IEC-60287-2-3 - Electric cables. Calculation of the current rating
BS-IEC-60287-3-1 - Electric cables. Calculation of the current rating
BS-IEC-60287-3-2 - Electric cables. Calculation of the current rating
BS-IEC-60287-3-3 - Electric cables. Calculation of the current rating
BS-IEC-60853-3 - Calculation of the cyclic and emergency current rating of cables
BS-IEC-62125 - Environmental considerations specific to insulated electrical power and control cables
BS-IEC-62895 - High voltage direct current (HVDC) power transmission. Cables with extruded insulation and their accessories for rated voltages up to 320 kV for land applications. Test methods and requirements
BS-IEC-63026 - Submarine power cables with extruded insulation and their accessories for rated voltages from 6 kV (Um = 7,2 kV) up to 60 kV (Um = 72,5 kV). Test methods and requirements
DD-CLC-61482-1 - Live Working, Flame-Resistant Materials for Clothing for Thermal Protection of Workers
DD-IEC/PAS-62338 - Screened balanced cables. Coupling attenuation measurement, triaxial method
PAS-256 - Buried assets. Capturing, recording, maintaining and sharing of location information and data. Code of practice
PAS-5308-1 - Control and instrumentation cables
PAS-5308-2 - Control and instrumentation cables
PD-2379 - Register of colours of manufacturers' identification threads for electric cables and cords. Tenth Edition
PD-CLC-50424 - Electric Cables, List of Residual Recognized National Types
PD-CLC-50576 - Electric cables - Extended application of test results for reaction to fire
PD-CLC-50658 - Cable management systems (CMS) providing support for cables with intrinsic fire resistance
PD-CLC-62125 - Environmental statement specific to TC 20. Electric cables
IEC:
IEC-141-1 - Tests on oil-filled and gas-pressure cables and their accessories - Part 1: Oil-filled, paper or polypropylene paper laminate insulated, metal-sheathed cables and accessories for alternating voltages up to and including 500 kV
IEC-141-1-1 - Amendment No. 1
IEC-141-2 - Tests on oil-filled and gas-pressure cables and their accessories. Part 2: Internal gas-pressure cables and accessories for alternating voltages up to 275 kV
IEC-141-2-1 - Amendment No. 1
IEC-141-3 - Tests on oil-filled and gas-pressure cables and their accessories. Part 3: External gas-pressure (gas compression) cables and accessories for alternating voltages up to 275 kV
IEC-141-3-1 - Amendment No. 1
IEC-141-4 - Tests on oil-filled and gas-pressure cables and their accessories. Part 4: Oil-impregnated paper-insulated high pressure oil-filled pipe-type cables and accessories for alternating voltages up to and including 400 kV
IEC-141-4-1 - Amendment No. 1
IEC-183 - Guide to the selection of high-voltage cables
IEC-183-1 - Amendment No. 1
IEC-227-4 - Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 4: Sheathed cables for fixed wiring
IEC-230 - Impulse tests on cables and their accessories
IEC-245-3 - Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 3: Heat resistant silicone insulated cables
IEC-245-5 - Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 5: Lift cables
IEC-245-6 - Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 6: Arc welding electrode cables
IEC-245-7 - Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 7: Heat resistant ethylene-vinyl acetate rubber insulated cables
IEC-287-1-2 - Electric cables - Calculation of the current rating - Part 1: Current rating equations (100 % load factor) and calculations of losses - Section 2: Sheath eddy current loss factors for two circuits in flat formation
IEC-287-2-2 - Electric cables - Calculation of the current rating - Part 2: Thermal resistance - Section 2: A method for calculating reduction factors for groups of cables in free air, protected from solar radiation
IEC-304 - Standard colours for insulation for low-frequency cables and wires
IEC-55-2 - Paper-insulated metal-sheathed cables for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables). Part 2: General and construction requirements
IEC-55-2-1 - Amendment No. 1
IEC-60050-461 - International Electrotechnical Vocabulary - Part 461: Electric cables
IEC-60055-1 - Paper-insulated metal-sheathed cables for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables) - Part 1: Tests on cables and their accessories
IEC-60055-1-1 - Amendment 1 - Paper-insulated metal-sheathed cables for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables) - Part 1: Tests on cables and their accessories
IEC-60055-2-2 - Amendment 2 - Paper-insulated metal-sheathed cables for rated voltages up to 18/30 kV (with copper or aluminium conductors and excluding gas-pressure and oil-filled cables) - Part 2: General and construction requirements
IEC-60092-350 - Electrical installations in ships - Part 350: General construction and test methods of power, control and instrumentation cables for shipboard and offshore applications
IEC-60092-350-RL - Electrical installations in ships - Part 350: General construction and test methods of power, control and instrumentation cables for shipboard and offshore applications
IEC-60092-351 - Part 351: Insulating Materials for Shipboard & Offshore Units, Power, Control, Instrumenta
IEC-60092-352 - Electrical installations in ships - Part 352: Choice and installation of electrical cables
IEC-60092-353 - Electrical installations in ships - Part 353: Power cables for rated voltages 1 kV and 3 kV
IEC-60092-353-RL - Electrical installations in ships - Part 353: Power cables for rated voltages 1 kV and 3 kV
IEC-60092-354 - Electrical installations in ships . Part 354: Single- and three-core power cables with extruded solid insulation for rated voltages 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV)
IEC-60092-354-RL - Electrical installations in ships – Part 354: Single- and three-core power cables with extruded solid insulation for rated voltages 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV)
IEC-60092-370 - Electrical installations in ships - Part 370: Guidance on the selection of cables for telecommunication and data transfer including radio-frequency cables
IEC-60092-370-RL - Electrical installations in ships - Part 370: Guidance on the selection of cables for telecommunication and data transfer including radio-frequency cables
IEC-60092-376 - Electrical installations in ships - Part 376: Cables for control and instrumentation circuits 150/250 V (300 V)
IEC-60092-379 - Electrical installations in ships - Part 379: Symmetrical category cables with transmission characteristics up to 1 000 MHz
IEC-60141-1-2 - Amendment 2
IEC-60183 - Guidance for the selection of high-voltage A.C. cable systems
IEC-60189-1 - Low-frequency cables and wires with PVC insulation and PVC sheath - Part 1: General test and measuring methods
IEC-60189-2 - Low-frequency cables and wires with PVC insulation and PVC sheath - Part 2: Cables in pairs, triples, quads and quintuples for inside installations
IEC-60189-3 - Low-frequency cables and wires with PVC insulation and PVC sheath - Part 3: Equipment wires with solid or stranded conductor wires, PVC insulated, in singles, pairs and triples
IEC-60227-1 - Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements
IEC-60227-2 - Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 2: Test methods
IEC-60227-2-1 - Amendment 1
IEC-60227-3 - Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 3: Non-sheathed cables for fixed wiring
IEC-60227-3-1 - Amendment No. 1
IEC-60227-3-RL - Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 3: Non-sheathed cables for fixed wiring
IEC-60227-4 - Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 4: Sheathed cables for fixed wiring
IEC-60227-4-1 - Amendment No. 1
IEC-60227-5 - Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 5: Flexible cables (cords)
IEC-60227-5-2 - Amendment 2: Polyvinyl Chloride Insulated Cables of Rated Voltages Up To & Including 450/7
IEC-60227-5-RL - Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 5: Flexible cables (cords)
IEC-60227-6 - Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 6: Lift cables and cables for flexible connections
IEC-60227-7 - Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 7: Flexible cables screened and unscreened with two or more conductors and of rated voltages up to and including 300/500 V
IEC-60227-7-1 - Amendment 1
IEC-60227-7-AM2 - Amendment 2 - Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 7: Flexible cables screened and unscreened with two or more conductors
IEC-60227-7-RL - Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 7: Flexible cables screened and unscreened with two or more conductors and of rated voltages up to and including 300/500 V
IEC-60228 - Conductors of insulated cables
IEC-60228 CMV - Conductors of insulated cables
IEC-60229 - Electric cables - Tests on extruded oversheaths with a special protective function
IEC-60230 - Impulse tests on cables and their accessories
IEC-60230-AM1 - Amendment 1 - Impulse tests on cables and their accessories
IEC-60245-1 - Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 1: General requirements
IEC-60245-1-1 - Amendment 1 - Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 1: General requirements
IEC-60245-2 - Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 2: Test methods
IEC-60245-2-1 - Amendment No. 1
IEC-60245-2-2 - Amendment No. 2
IEC-60245-3-1 - Amendment No. 1
IEC-60245-3-AM2 - Amendment 2 - Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 3: Heat resistant silicone insulated cables
IEC-60245-4 - Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 4: Cords and flexible cables
IEC-60245-4-2 - Amendment 2: Rubber Insulated Cables - Rated Voltages Up To& Including 450/750 V - Part
IEC-60245-5-1 - Amendment 1 - Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 5: Lift cables
IEC-60245-6-1 - Amendment No. 1
IEC-60245-6-2 - Amendment 2 - Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 6: Arc welding electrode cables
IEC-60245-7-1 - Amendment No. 1
IEC-60245-8 - Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 8: Cords for applications requiring high flexibility
IEC-60245-8-1 - Amendment 1 - Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 8: Cords for applications requiring high flexibility
IEC-60245-8-AM2 - Amendment 2 - Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 8: Cords for applications requiring high flexibility
IEC-60287-1-1 - Electric cables - Calculation of the current rating - Part 1-1: Current rating equations (100 % load factor) and calculation of losses - General
IEC-60287-1-1-AM1 - Amendment 1 - Electric cables - Calculation of the current rating - Part 1-1: Current rating equations (100 % load factor) and calculation of losses - General
IEC-60287-1-1 CMV - Electric cables - Calculation of the current rating - Part 1-1: Current rating equations (100 % load factor) and calculation of losses - General
IEC-60287-1-2 - Electric cables - Calculation of the current rating - Part 1-2: Current rating equations (100 % load factor) and calculations of losses - Sheath eddy current loss factors for two circuits in flat formation
IEC-60287-1-3 - Electric cables - Calculation of the current rating - Part 1-3: Current rating equations (100 % load factor) and calculation of losses - Current sharing between parallel single-core cables and calculation of circulating current losses
IEC-60287-1-3 CMV - Electric cables - Calculation of the current rating - Part 1-3: Current rating equations (100 % load factor) and calculation of losses - Current sharing between parallel single-core cables and calculation of circulating current losses
IEC-60287-2-1 - Electric cables - Calculation of the current rating - Part 2-1: Thermal resistance - Calculation of thermal resistance
IEC-60287-2-1-1 - Amendment 1
IEC-60287-2-1-2 - Amendment 2 - Electric cables - Calculation of the current rating - Part 2-1: Thermal resistance - Calculation of thermal resistance
IEC-60287-2-1 CMV - Electric cables - Calculation of the current rating - Part 2-1: Thermal resistance - Calculation of thermal resistance
IEC-60287-2-1-RL - Assessment of power quality - Characteristics of electricity supplied by public networks
IEC-60287-2-3 - Electric cables - Calculation of the current rating - Part 2-3: Thermal resistance - Cables installed in ventilated tunnels
IEC-60287-2-3-RL - Electric cables - Calculation of the current rating - Part 2-3: Thermal resistance - Cables installed in ventilated tunnels
IEC-60287-3-1 - Electric cables - Calculation of the current rating - Part 3-1: Operating conditions - Site reference conditions
IEC-60287-3-1-1 - Amendment 1
IEC-60287-3-1-RL - Electric cables - Calculation of the current rating - Part 3-1: Operating conditions - Site reference conditions
IEC-60287-3-2 - Electric cables - Calculation of the current rating - Part 3-2: Sections on operating conditions - Economic optimization of power cable size
IEC-60287-3-3 - Electric cables - Calculation of the current rating - Part 3-3: Sections on operating conditions - Cables crossing external heat sources
IEC-60287 SERIES - Electric cables - ALL PARTS
IEC-60331-1 - Tests for electric cables under fire conditions - Circuit integrity - Part 1: Test method for fire with shock at a temperature of at least 830°C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter exceeding 20 mm
IEC-60331-11 - Tests for electric cables under fire conditions - Circuit integrity - Part 11: Apparatus - Fire alone at a flame temperature of at least 750 °C
IEC-60331-11/A1 - Amendment 1 - Tests for electric cables under fire conditions - Circuit integrity - Part 11: Apparatus - Fire alone at a flame temperature of at least 750 °C
IEC-60331-1-RL - Tests for electric cables under fire conditions - Circuit integrity - Part 1: Test method for fire with shock at a temperature of at least 830¦C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter exceeding 20 mm
IEC-60331-2 - Tests for electric cables under fire conditions - Circuit integrity - Part 2: Test method for fire with shock at a temperature of at least 830°C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter not exceeding 20mm
IEC-60331-21 - Tests for electric cables under fire conditions - Circuit integrity - Part 21: Procedures and requirements - Cables of rated voltage up to and including 0,6/1,0 kV
IEC-60331-23 - Tests for electric cables under fire conditions - Circuit integrity - Part 23: Procedures and requirements - Electric data cables
IEC-60331-2-RL - Tests for electric cables under fire conditions - Circuit integrity - Part 2: Test method for fire with shock at a temperature of at least 830¦C for cables of rated voltage up to and including 0,6/1,0 kV and with an overall diameter not exceeding 20mm
IEC-60331-3 - Tests for electric cables under fire conditions - Circuit integrity - Part 3: Test method for fire with shock at a temperature of at least 830°C for cables of rated voltage up to and including 0,6/1,0 kV tested in a metal enclosure
IEC-60331-3-RL - Tests for electric cables under fire conditions - Circuit integrity - Part 3: Test method for fire with shock at a temperature of at least 830¦C for cables of rated voltage up to and including 0,6/1,0 kV tested in a metal enclosure
IEC-60331-4 - Tests for electric cables under fire conditions . Circuit integrity . Part 4: Test method for fire with shock at a temperature of at least 830 °C for cables of rated voltage higher than 1 kV up to and including 30 kV
IEC-60332-1-1-AM1 - Amendment 1 - Tests on electric and optical fibre cables under fire conditions - Part 1-1: Test for vertical flame propagation for a single insulated wire or cable - Apparatus
IEC-60332-1-2 - Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vertical flame propagation for a single insulated wire or cable - Procedure for 1 kW pre-mixed flame
IEC-60332-1-2-AM1 - Amendment 1 - Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vertical flame propagation for a single insulated wire or cable - Procedure for 1 kW pre-mixed flame
IEC-60332-1-3-AM1 - Amendment 1 - Tests on electric and optical fibre cables under fire conditions - Part 1-3: Test for vertical flame propagation for a single insulated wire or cable - Procedure for determination of flaming droplets/particles
IEC-60332-3-10 - Tests on electric and optical fibre cables under fire conditions - Part 3-10: Test for vertical flame spread of vertically-mounted bunched wires or cables - Apparatus
IEC-60332-3-10-1 - Amendment 1 - Tests on electric and optical fibre cables under fire conditions - Part 3-10: Test for vertical flame spread of vertically-mounted bunched wires or cables - Apparatus
IEC-60332-3-10-RL - Tests on electric and optical fibre cables under fire conditions - Part 3-10: Test for vertical flame spread of vertically-mounted bunched wires or cables - Apparatus
IEC-60332-3-21 - Tests on electric and optical fibre cables under fire conditions - Part 3-21: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A F/R
IEC-60332-3-21-RL - Tests on electric and optical fibre cables under fire conditions - Part 3-21: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A F/R
IEC-60332-3-22 - Tests on electric cables under fire conditions - Part 3-22: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A
IEC-60332-3-22-1 - Amendment 1 - Tests on electric and optical fibre cables under fire conditions - Part 3-22: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A
IEC-60332-3-22-RL - Tests on electric cables under fire conditions - Part 3-22: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A
IEC-60332-3-23 - Tests on electric and optical fibre cables under fire conditions - Part 3-23: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category B
IEC-60332-3-23-1 - Amendment 1 - Tests on electric and optical fibre cables under fire conditions - Part 3-23: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category B
IEC-60332-3-23-RL - Tests on electric and optical fibre cables under fire conditions - Part 3-23: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category B
IEC-60332-3-24 - Tests on electric and optical fibre cables under fire conditions - Part 3-24: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category C
IEC-60332-3-24-1 - Amendment 1 - Tests on electric and optical fibre cables under fire conditions - Part 3-24: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category C
IEC-60332-3-24-RL - Tests on electric and optical fibre cables under fire conditions - Part 3-24: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category C
IEC-60332-3-25 - Tests on electric and optical fibre cables under fire conditions - Part 3-25: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category D
IEC-60332-3-25-1 - Amendment 1 - Tests on electric and optical fibre cables under fire conditions - Part 3-25: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category D
IEC-60332-3-25-RL - Tests on electric and optical fibre cables under fire conditions - Part 3-25: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category D
IEC-60502-1 - Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) - Part 1: Cables for rated voltages of 1 kV (Um = 1,2 kV) and 3 kV (Um = 3,6 kV)
IEC-60502-1-1 - Amendment 1 - Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) - Part 1: Cables for rated voltages of 1 kV (Um = 1,2 kV) and 3 kV (Um = 3,6 kV)
IEC-60502-1-RL - Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) - Part 1: Cables for rated voltages of 1 kV (Um = 1,2 kV) and 3 kV (Um = 3,6 kV)
IEC-60502-2 - Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) - Part 2: Cables for rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV)
IEC-60502-2-AM1 - Amendment 1 - Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) - Part 2: Cables for rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV)
IEC-60502-2-RL - Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) - Part 2: Cables for rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV)
IEC-60502-4 - Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) - Part 4: Test requirements on accessories for cables with rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV)
IEC-60502 SERIES - Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) - ALL PARTS
IEC-60502-SERIES - Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) - ALL PARTS
IEC-60649 - Calculation of maximum external diameter of cables for indoor installations
IEC-60702-1 - Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 1: Cables
IEC-60702-1-AM1 - Amendment 1 - Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 1: Cables
IEC-60702-2 - Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 2: Terminations
IEC-60702-2-AM1 - Amendment 1 - Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 2: Terminations
IEC-60702-3 - Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 3: Guide for use
IEC-60708 - Low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath
IEC-60724 - Short-circuit temperature limits of electric cables with rated voltages of 1 kV (Um = 1,2 kV) and 3 kV (Um = 3,6 kV)
IEC-60724-1 - Amendment 1 - Short-circuit temperature limits of electric cables with rated voltages of 1 kV (Um = 1,2 kV) and 3 kV (Um = 3,6 kV)
IEC-60754-1 - Test on gases evolved during combustion of materials from cables - Part 1: Determination of the halogen acid gas content
IEC-60754-2 - Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductivity
IEC-60754-3 - Test on gases evolved during combustion of materials from cables - Part 3: Measurement of low level of halogen content by ion chromatography
IEC-60799 - Electrical accessories - Cord sets and interconnection cord sets
IEC-60799-RL - Electrical accessories - Cord sets and interconnection cord sets
IEC-60800 - Heating cables with a rated voltage up to and including 300/500 V for comfort heating and prevention of ice formation
IEC-60800-RL - Heating cables with a rated voltage up to and including 300/500 V for comfort heating and prevention of ice formation
IEC-60811-100 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 100: General
IEC-60811-1-3 - Part 1-3: General Application - Methods for Determining Thedensity - Water Absorption Te
IEC-60811-201 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 201: General tests - Measurement of insulation thickness
IEC-60811-201-AM1 - Amendment 1 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 201: General tests - Measurement of insulation thickness
IEC-60811-201-AM2 - Amendment 2 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 201: General tests - Measurement of insulation thickness
IEC-60811-202 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 202: General tests - Measurement of thickness of non-metallic sheath
IEC-60811-202-AM1 - Amendment 1 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 202: General tests - Measurement of thickness of non-metallic sheath
IEC-60811-202-AM2 - Amendment 2 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 202: General tests - Measurement of thickness of non-metallic sheath
IEC-60811-203 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 203: General tests - Measurement of overall dimensions
IEC-60811-2-1 - Part 2-1: Methods Specific To Elastomeric Compounds - Ozoneresistance, Hot Set & Mineral
IEC-60811-301 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 301: Electrical tests - Measurement of the permittivity at 23 °C of filling compounds
IEC-60811-302 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 302: Electrical tests - Measurement of the d.c. resistivity at 23 °C and 100 °C of filling compounds
IEC-60811-401 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven
IEC-60811-401-AM1 - Amendment 1 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven
IEC-60811-402 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 402: Miscellaneous tests - Water absorption tests
IEC-60811-403 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 403: Miscellaneous tests - Ozone resistance test on cross-linked compounds
IEC-60811-404 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 404: Miscellaneous tests - Mineral oil immersion tests for sheaths
IEC-60811-405 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 405: Miscellaneous tests - Thermal stability test for PVC insulations and PVC sheaths
IEC-60811-406 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 406: Miscellaneous tests - Resistance to stress cracking of polyethylene and polypropylene compounds
IEC-60811-407 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 407: Miscellaneous tests - Measurement of mass increase of polyethylene and polypropylene compounds
IEC-60811-408 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 408: Miscellaneous tests - Long-term stability test of polyethylene and polypropylene compounds
IEC-60811-409 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 409: Miscellaneous tests - Loss of mass test for thermoplastic insulations and sheaths
IEC-60811-410 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 410: Miscellaneous tests - Test method for copper-catalyzed oxidative degradation of polyolefin insulated conductors
IEC-60811-411 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 411: Miscellaneous tests - Low-temperature brittleness of filling compounds
IEC-60811-412 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 412: Miscellaneous tests - Thermal ageing methods - Ageing in an air bomb
IEC-60811-501 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 501: Mechanical tests - Tests for determining the mechanical properties of insulating and sheathing compounds
IEC-60811-501-AM1 - Amendment 1 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 501: Mechanical tests - Tests for determining the mechanical properties of insulating and sheathing compounds
IEC-60811-501-AM2 - Amendment 2 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 501: Mechanical tests - Tests for determining the mechanical properties of insulating and sheathing compounds
IEC-60811-502 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 502: Mechanical tests - Shrinkage test for insulations
IEC-60811-503 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 503: Mechanical tests - Shrinkage test for sheaths
IEC-60811-503-AM1 - Amendment 1 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 503: Mechanical tests - Shrinkage test for sheaths
IEC-60811-504 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 504: Mechanical tests - Bending tests at low temperature for insulation and sheaths
IEC-60811-505 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 505: Mechanical tests - Elongation at low temperature for insulations and sheaths
IEC-60811-506 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 506: Mechanical tests - Impact test at low temperature for insulations and sheaths
IEC-60811-507 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 507: Mechanical tests - Hot set test for cross-linked materials
IEC-60811-508 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 508: Mechanical tests - Pressure test at high temperature for insulation and sheaths
IEC-60811-508-AM1 - Amendment 1 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 508: Mechanical tests - Pressure test at high temperature for insulation and sheaths
IEC-60811-508-AM2 - Amendment 2 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 508: Mechanical tests - Pressure test at high temperature for insulation and sheaths
IEC-60811-509 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 509: Mechanical tests - Test for resistance of insulations and sheaths to cracking (heat shock test)
IEC-60811-509-AM1 - Amendment 1 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 509: Mechanical tests - Test for resistance of insulations and sheaths to cracking (heat shock test)
IEC-60811-510 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 510: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Wrapping test after thermal ageing in air
IEC-60811-511 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 511: Mechanical tests - Measurement of the melt flow index of polyethylene and polypropylene compounds
IEC-60811-511-AM1 - Amendment 1 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 511: Mechanical tests - Measurement of the melt flow index of polyethylene and polypropylene compounds
IEC-60811-512 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 512: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at break after conditioning at elevated temperature
IEC-60811-513 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 513: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Wrapping test after conditioning
IEC-60811-601 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 601: Physical tests - Measurement of the drop point of filling compounds
IEC-60811-602 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 602: Physical tests - Separation of oil in filling compounds
IEC-60811-603 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 603: Physical tests - Measurement of total acid number of filling compounds
IEC-60811-604 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 604: Physical tests - Measurement of absence of corrosive components in filling compounds
IEC-60811-605 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 605: Physical tests - Measurement of carbon black and/or mineral filler in polyethylene compounds
IEC-60811-606 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 606: Physical tests - Methods for determining the density
IEC-60811-607 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 607: Physical tests - Test for the assessment of carbon black dispersion in polyethylene and polypropylene
IEC-60840 - Power cables with extruded insulation and their accessories for rated voltages above 30 kV (Um= 36 kV) up to 150 kV (Um = 170 kV) - Test methods and requirements
IEC-60840-AM1 - Amendment 1 - Power cables with extruded insulation and their accessories for rated voltages above 30 kV (Um= 36 kV) up to 150 kV (Um = 170 kV) - Test methods and requirements
IEC-60840-RL - Power Cables With Extruded Insulation & Their Accessories for Rated Voltages Above 30
IEC-60853-1-2 - Amendment 2 - Calculation of the cyclic and emergency current rating of cables - Part 1: Cyclic rating factor for cables up to and including 18/30 (36) kV
IEC-60853-2-1 - Amendment 1 - Calculation of the cyclic and emergency current rating of cables - Part 2: Cyclic rating of cables greater than 18/30 (36) kV and emergency ratings for cables of all voltages
IEC-60853-3 - Calculation of the cyclic and emergency current rating of cables - Part 3: Cyclic rating factor for cables of all voltages, with partial drying of the soil
IEC-60885-3 - Electrical test methods for electric cables - Part 3: Test methods for partial discharge measurements on lengths of extruded power cables
IEC-60885-3-RL - Assessment of power quality - Characteristics of electricity supplied by public networks
IEC-60949-1 - Amendment 1 - Calculation of thermally permissible short-circuit currents, taking into account non-adiabatic heating effects
IEC-60986 - Short-circuit temperature limits of electric cables with rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV)
IEC-60986-1 - Amendment 1 - Short-circuit temperature limits of electric cables with rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV)
IEC-61034-1 - Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus
IEC-61034-1-AM1 - Amendment 1 - Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus
IEC-61034-2 - Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements
IEC-61034-2-AM1 - Amendment 1 - Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements
IEC-61138 - Cables for portable earthing and short-circuiting equipment
IEC-61238-1 - Compression and mechanical connectors for power cables for rated voltages up to 30 kV (Um = 36 kV) - Part 1: Test methods and requirements
IEC-61238-1-1 - Compression and mechanical connectors for power cables - Part 1-1: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages up to 1 kV (Um = 1,2 kV) tested on non-insulated conductors
IEC-61238-1-2 - Compression and mechanical connectors for power cables - Part 1-2: Test methods and requirements for insulation piercing connectors for power cables for rated voltages up to 1 kV (Um = 1,2 kV) tested on insulated conductors
IEC-61238-1-3 - Compression and mechanical connectors for power cables - Part 1-3: Test methods and requirements for compression and mechanical connectors for power cables for rated voltages above 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) tested on non-insulated conductors
IEC-61394 - Overhead lines - Requirements for greases for aluminium, aluminium alloy and steel bare conductors
IEC-61442 - Test methods for accessories for power cables with rated voltages from 6 kV (Um = 7,2 kV) up to 36 kV (Um = 42 kV)
IEC-61442-RL - Test methods for accessories for power cables with rated voltages from 6 kV (Um = 7,2 kV) up to 36 kV (Um = 42 kV)
IEC-61443 - Short-circuit temperature limits of electric cables with rated voltages above 30 kV (Um = 36 kV)
IEC-61443-1 - Amendment 1 - Short-circuit temperature limits of electric cables with rated voltages above 30 kV (Um = 36 kV)
IEC-61901 - Tests recommended on cables with a longitudinally applied metal foil for rated voltages above 30 kV (Um = 36 kV) up to and including 500 kV (Um = 550 kV)
IEC-62067 - Power cables with extruded insulation and their accessories for rated voltages above 150 kV (Um = 170 kV) up to 500 kV (Um = 550 kV) - Test methods and requirements
IEC-62067-1 - Amendment 1: Power Cables With Extruded Insulation & Their Accessories for Rated Volta
IEC-62067-RL - Power Cables With Extruded Insulation & Their Accessories for Rated Voltages Above 150
IEC-62095 - Electric cables - Calculations for current ratings - Finite element method
IEC-62100 - Cables for aeronautical ground lighting primary circuits
IEC-62125 - Environmental considerations specific to insulated electrical power and control cables
IEC-62230 - Electric cables - Spark-test method
IEC-62230-AM1 - Amendment 1 - Electric cables - Spark-test method
IEC-62440 - Electric cables with a rated voltage not exceeding 450/750 V - Guide to use
IEC-62602 - Conductors of insulated cables - Data for AWG and KCMIL sizes
IEC-62821-1 - Electric cables - Halogen-free, low smoke, thermoplastic insulated and sheathed cables of rated voltages up to and including 450/750 V - Part 1: General requirements
IEC-62821-2 - Electric cables - Halogen-free, low smoke, thermoplastic insulated and sheathed cables of rated voltages up to and including 450/750 V - Part 2: Test methods
IEC-62821-3 - Electric cables - Halogen-free, low smoke, thermoplastic insulated and sheathed cables of rated voltages up to and including 450/750 V - Part 3: Flexible cables (cords)
IEC-62893-1 - Charging cables for electric vehicles for rated voltages up to and including 0,6/1 kV - Part 1: General requirements
IEC-62893-1-AM1 - Amendment 1 - Charging cables for electric vehicles for rated voltages up to and including 0,6/1 kV - Part 1: General requirements
IEC-62893-2 - Charging cables for electric vehicles for rated voltages up to and including 0,6/1 kV - Part 2: Test methods
IEC-62893-3 - Charging cables for electric vehicles for rated voltages up to and including 0,6/1 kV - Part 3: Cables for AC charging according to modes 1, 2 and 3 of IEC 61851-1 of rated voltages up to and including 450/750 V
IEC-62893-4-1 - Charging cables for electric vehicles of rated voltages up to and including 0,6/1 kV - Part 4-1: Cables for DC charging according to mode 4 of IEC 61851-1 - DC charging without use of a thermal management system
IEC-62895 - High voltage direct current (HVDC) power transmission - Cables with extruded insulation and their accessories for rated voltages up to 320 kV for land applications - Test methods and requirements
IEC-62930 - Electric cables for photovoltaic systems with a voltage rating of 1,5 kV DC
IEC-63010-1 - Halogen-free thermoplastic insulated and sheathed flexible cables of rated voltages up to and including 300/300 V - Part 1: General requirements and cables
IEC-63010-2 - Halogen-free thermoplastic insulated and sheathed flexible cables of rated voltages up to and including 300/300 V - Part 2: Test methods
IEC-63026 - Submarine power cables with extruded insulation and their accessories for rated voltages from 6 kV (Um = 7,2 kV) up to 60 kV (Um = 72,5 kV) - Test methods and requirements
IEC-63075 - Superconducting AC power cables and their accessories for rated voltages from 6 kV to 500 kV - Test methods and requirements
IEC-63294 - Test methods for electric cables with rated voltages up to and including 450/750 V
IEC-719 - Calculation of the lower and upper limits for the average outer dimensions of cables with circular copper conductors and of rated voltages up to and including 450/750 V
IEC-853-1 - Calculation of the cyclic and emergency current rating of cables. Part 1: Cyclic rating factor for cables up to and including 18/30(36) kV
IEC-853-1-1 - Amendment No. 1
IEC-853-2 - Calculation of the cyclic and emergency current rating of cables. Part 2: Cyclic rating of cables greater than 18/30 (36) kV and emergency ratings for cables of all voltages
IEC-885-2 - Electrical test methods for electric cables. Part 2: Partial discharge tests
IEC-885-3 - Electrical test methods for electric cables. Part 3: Test methods for partial discharge measurements on lengths of extruded power cables
IEC-918 - PVC insulated ribbon cable with a pitch of 1.27 mm suitable for insulation displacement termination
IEC-918-1 - Amendment No. 1
ISO:
IEC-60227-1-RL - Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements
Other SDOs:
BS-EN-IEC-61340-4-3 - Electrostatics
BS-IEC-60287-2-3-TC - Tracked Changes. Electric cables. Calculation of the current rating
EN-13501-6 - Fire classification of construction products and building elements - Part 6: Classification using data from reaction to fire tests on electric cables
EN-1366-11 - Fire resistance tests for service installations - Part 11: Fire protective systems for cable systems and associated components
EN-50143 - Cables for Signs & Luminous-Discharge-Tube Installations Operating From a No-Load Rate
EN-50214 - Flat Polyvinyl Chloride Sheathed Flexible Cables
EN-50264-1 - Railway Applications, Railway Rolling Stock Power & Control Cables Having Special Fir
EN-50264-2-1 - Railway Applications, Railway Rolling Stock Power & Control Cables Having Special Fir
EN-50264-2-2 - Railway Applications, Railway Rolling Stock Power & Control Cables Having Special Fir
EN-50264-3-1 - Railway Applications, Railway Rolling Stock Power & Control Cables Having Special Fir
EN-50264-3-2 - Railway Applications, Railway Rolling Stock Power & Control Cables Having Special Fir
EN-50289-3-1 - Communication Cables, Specifications for Test Methods, Mechanical Test Methods, Genera
EN-50355 - Railway applications - Railway rolling stock cables having special fire performance - Guide to use
EN-50382-1 - Railway applications - Railway rolling stock high temperature power cables having special fire performance - Part 1: General requirements
EN-50382-2 - Railway applications - Railway rolling stock high temperature power cables having special fire performance - Part 2: Single core silicone rubber insulated cables for 120 Degrees C or 150 Degrees C
EN-50396 - Non electrical test methods for low voltage energy cables
EN-50399 - Common test methods for cables under fire conditions - Heat release and smoke production measurement on cables during flame spread test - Test apparatus, procedures, results
EN-50525-1 - Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 1: General requirements
EN-50525-2-11 - Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (Uo/U) - Part 2-11: Cables for general applications - Flexible cables with thermoplastic PVC insulation
EN-50525-2-12 - Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (Uo/U) - Part 2-12: Cables for general applications - Cables with thermoplastic PVC insulation for extensible leads
EN-50525-2-21 - Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (Uo/U) - Part 2-21: Cables for general applications - Flexible cables with crosslinked elastomeric insulation
EN-50525-2-22 - Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-22: Cables for general applications - High flexibility braided cables with crosslinked elastomeric insulation
EN-50525-2-31 - Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-31: Cables for general applications - Single core non-sheathed cables with thermoplastic PVC insulation
EN-50525-2-41 - Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-41: Cables for general applications - Single core cables with crosslinked silicone rubber insulation
EN-50525-2-42 - Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-42: Cables for general applications - Single core non-sheathed cables with crosslinked EVA insulation
EN-50525-2-51 - Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-51: Cables for general applications - Oil resistant control cables with thermoplastic PVC insulation
EN-50525-2-71 - Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-71: Cables for general applications - Flat tinsel cables (cords) with thermoplastic PVC insulation
EN-50525-2-72 - Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-72: Cables for general applications - Flat divisible cables (cords) with thermoplastic PVC insulation
EN-50525-2-81 - Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-81: Cables for general applications - Cables with crosslinked elastomeric covering for arc welding
EN-50525-2-82 - Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-82: Cables for general applications - Cables with crosslinked elastomeric insulation for decorative chains
EN-50525-2-83 - Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 2-83: Cables for general applications - Multicore cables with crosslinked silicone rubber insulation
EN-50525-3-11 - Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 3-11: Cables with special fire performance - Flexible cables with halogen-free thermoplastic insulation, and low emission of smoke
EN-50525-3-21 - Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 3-21: Cables with special fire performance - Flexible cables with halogen-free crosslinked insulation, and low emission of smoke
EN-50525-3-31 - Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) - Part 3-31: Cables with special fire performance - Single core non-sheathed cables with halogen-free thermoplastic insulation, and low emission of smoke
EN-50525-3-41 - Electric cables. Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U)
EN-50565-1 - Electric cables - Guide to use for cables with a rated voltage not exceeding 450/750 V (U0/U) - Part 1: General guidance
EN-50565-2 - Electric cables - Guide to use for cables with a rated voltage not exceeding 450/750 V (U0/U) - Part 2: Specific guidance related to EN 50525 cable types
EN-50575 - Power, control and communication cables - Cables for general applications in construction works subject to reaction to fire requirements
EN-50577 - Electric cables - Fire resistance test for unprotected electric cables (P classification)
EN-50620 - Electric cables - Charging cables for electric vehicles
EN-60228 - Conductors of Insulated Cables
EN-60229 - Electric Cables, Tests on Extruded Oversheaths With a Special Protective Function
EN-60332-1-1 - Tests on electric and optical fibre cables under fire conditions - Part 1-1: Test for vertical flame propagation for a single insulated wire or cable - Apparatus
EN-60332-1-2 - Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vertical flame propagation for a single insulated wire or cable - Procedure for 1 kW pre-mixed flame
EN-60332-1-3 - Tests on electric and optical fibre cables under fire conditions - Part 1-3: Test for vertical flame propagation for a single insulated wire or cable - Procedure for determination of flaming droplets/particles
EN-60332-2-1 - Tests on Electric & Optical Fibre Cables Under Fire Conditions, Test for Vertical Flam
EN-60332-3-10 - Part 3-10: Test for Vertical Flame Spread of Vertically-Mounted Bunched Wires or Cable
EN-60332-3-21 - Part 3-21: Test for Vertical Flame Spread of Vertically-Mounted Bunched Wires or Cable
EN-60332-3-22 - Part 3-22: Test for Vertical Flame Spread of Vertically-Mounns, Test for Vertical Flam
EN-60332-3-23 - Part 3-23: Test for Vertical Flame Spread of Vertically-Mounted Bunched Wires or Cable
EN-60332-3-24 - Part 3-24: Test for Vertical Flame Spread of Vertically-Mounted Bunched Wires or Cable
EN-60332-3-25 - Part 3-25: Test for Vertical Flame Spread of Vertically-Mounted Bunched Wires or Cable
EN-60702-1 - Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 1: Cables
EN-60702-2 - Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 2: Terminations
EN-60702-3 - Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 3: Guidance for use
EN-60754-1 - Test on gases evolved during combustion of materials from cables - Part 1: Determination of the halogen acid gas content
EN-60754-2 - Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductivity
EN-60811-100 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 100: General
EN-60811-201 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 201: General tests - Measurement of insulation thickness
EN-60811-202 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 202: General tests - Measurement of thickness of non-metallic sheath
EN-60811-203 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 203: General tests - Measurement of overall dimensions
EN-60811-301 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 301: Electrical tests - Measurement of the permittivity at 23 Degrees C of filling compounds
EN-60811-302 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 302: Electrical tests - Measurement of the d.c. resistivity at 23 Degrees C and 100 Degrees C of filling compounds
EN-60811-401 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven
EN-60811-402 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 402: Miscellaneous tests - Water absorption tests
EN-60811-403 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 403: Miscellaneous tests - Ozone resistance test on cross-linked compounds
EN-60811-404 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 404: Miscellaneous tests - Mineral oil immersion tests for sheaths
EN-60811-405 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 405: Miscellaneous tests - Thermal stability test for PVC insulations and PVC sheaths
EN-60811-406 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 405: Miscellaneous tests - Thermal stability test for PVC insulations and PVC sheaths
EN-60811-407 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 407: Miscellaneous tests - Measurement of mass increase of polyethylene and polypropylene compounds
EN-60811-408 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 408: Miscellaneous tests - Long-term stability test of polyethylene and polypropylene compounds
EN-60811-409 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 409: Miscellaneous tests - Loss of mass test for thermoplastic insulations and sheaths
EN-60811-410 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 410: Miscellaneous tests - Test method for copper-catalyzed oxidative degradation of polyolefin insulated conductors
EN-60811-411 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 411: Miscellaneous tests - Low-temperature brittleness of filling compounds
EN-60811-412 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 412: Miscellaneous tests - Thermal ageing methods - Ageing in an air bomb
EN-60811-501 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 501: Mechanical tests - Tests for determining the mechanical properties of insulating and sheathing compounds
EN-60811-502 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 502: Mechanical tests - Shrinkage test for insulations
EN-60811-503 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 503: Mechanical tests - Shrinkage test for sheaths
EN-60811-504 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 504: Mechanical tests - Bending tests at low temperature for insulation and sheaths
EN-60811-505 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 505: Mechanical tests - Elongation at low temperature for insulations and sheaths
EN-60811-506 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 506: Mechanical tests - Impact test at low temperature for insulations and sheaths
EN-60811-507 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 507: Mechanical tests - Hot set test for cross-linked materials
EN-60811-508 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 508: Mechanical tests - Pressure test at high temperature for insulation and sheaths
EN-60811-509 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 509: Mechanical tests - Test for resistance of insulations and sheaths to cracking (heat shock test)
EN-60811-510 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 510: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Wrapping test after thermal ageing in air
EN-60811-511 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 511: Mechanical tests - Measurement of the melt flow index of polyethylene compounds
EN-60811-512 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 512: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at break after conditioning at elevated temperature
EN-60811-513 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 513: Mechanical tests - Methods specific to polyethylene and polypropylene compounds - Wrapping test after conditioning
EN-60811-601 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 601: Physical tests - Measurement of the drop point of filling compounds
EN-60811-602 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 602: Physical tests - Separation of oil in filling compounds
EN-60811-603 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 603: Physical tests - Measurement of total acid number of filling compounds
EN-60811-604 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 604: Physical tests - Measurement of absence of corrosive components in filling compounds
EN-60811-605 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 605: Physical tests - Measurement of carbon black and/or mineral filler in polyethylene compounds
EN-60811-606 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 606: Physical tests - Methods for determining the density
EN-60811-607 - Electric and optical fibre cables - Test methods for non-metallic materials - Part 607: Physical tests - Test for the assessment of carbon black dispersion in polyethylene and polypropylene
EN-60885-3 - Electrical test methods for electric cables - Part 3: Test methods for partial discharge measurements on lengths of extruded power cables
EN-61034-1 - Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus
EN-61034-2 - Measurement of smoke density of cables burning under defined conditions - Part 2: Test procedure and requirements
EN-61138 - Cables for Portable Earthing & Short-Circuiting Equipment
EN-61394 - Overhead lines - Requirements for greases for aluminium, aluminium alloy and steel bare conductors
EN-62230 - Electric cables - Spark-test method
EN-62491 - Industrial Systems, Installations & Equipment & Industrial Products, Labelling of Cabl
EN-IEC-60230 - Impulse tests on cables and their accessories
EN-IEC-60332-3-10 - Tests on electric and optical fibre cables under fire conditions Part 3-10: Test for vertical flame spread of vertically-mounted bunched wires or cables - Apparatus
EN-IEC-60332-3-21 - Tests on electric and optical fibre cables under fire conditions - Part 3-21: Test for vertical flame spread of vertically-mounted bunched wires or cables °Ctegory A F/R
EN-IEC-60332-3-22 - Tests on electric and optical fibre cables under fire conditions - Part 3-22: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A
EN-IEC-60332-3-23 - Tests on electric and optical fibre cables under fire conditions - Part 3-23: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category B
EN-IEC-60332-3-24 - Tests on electric and optical fibre cables under fire conditions - Part 3-24: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category C
EN-IEC-60332-3-25 - Tests on electric and optical fibre cables under fire conditions - Part 3-24: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category D
JIS-C-3005 - Test methods for rubber or plastic insulated wires and cables
JIS-C-3316 - Polyvinyl chloride insulated wires for electrical apparatus
JIS-C-3342 - 600 V Polyvinyl chloride insulated and sheathed cables
JIS-C-3401 - Control cables
JIS-C-3407 - High voltage cables for X-ray apparatus
JIS-C-3408 - Travelling cables for elevators
JIS-C-3410 - Cables and flexible cords for electrical equipment of ships
JIS-C-3612 - 600V Flame retardant polyethylene insulated wires
JIS-C-3612-AM1 - 600 V Flame retardant polyethylene insulated wires (Amendment 1)
JIS-C-3662-7-AM1 - Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V -- Part 7: Flexible cables screened and unscreened with two or more conductors (Amendment 1)
JIS-C-3663-8-AM1 - Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 8: Cords for applications requiring high flexibility (Amendment 1)
SS-EN-13160-3 - Leak detection systems - Part 3: Requirements and test/assessment methods for liquid systems for tanks
SS-EN-13501-6 - Fire classification of construction products and building elements - Part 6: Classification using data from reaction to fire tests on power, control and communication cables
SS-EN-1366-11 - Fire resistance tests for service installations - Part 11: Fire protective systems for cable systems and associated components
SS-EN-60228 - Conductors of insulated cables
UNE-EN-50200 - Method of test for resistance to fire of unprotected small cables for use in emergency circuits
sOURCE : Document Center List of Standards on Cables (https://www.document-center.com/standards/ics/29.060.20)