DIN 53516: Testing of Rubber and Elastomers – Determination of Abrasion Resistance

Overview:
DIN 53516 is a German standard used for evaluating the abrasion resistance of rubber and elastomeric materials. This test method measures material wear when subjected to abrasive action, providing a comparative assessment of durability. It is widely used in industries such as automotive, industrial machinery, footwear, and conveyor belt manufacturing.

---

Scope and Field of Application
This standard applies to elastomers that require high durability and resistance to mechanical wear. The test method is particularly useful for:

• Assessing the abrasion resistance of rubber compounds under controlled conditions.
• Ensuring consistency in product quality across different production batches.
• Comparing the durability of different elastomer formulations.
• Developing technical specifications for elastomers used in high-wear applications.

However, results obtained from this testing method cannot be assumed to represent the exact wear behavior of elastomers in real-life applications. Factors such as temperature, humidity, and exposure to chemicals can influence actual performance.

---

Standard Reference
DIN 53516 is closely related to the international standard **ISO 4649-1985**, which provides additional guidance on abrasion testing for rubber materials.

Additionally, other related standards include:

• **ASTM D5963** – Standard Test Method for Rubber Property–Abrasion Resistance.
• **ISO 868** – Shore Hardness Testing for Elastomers, which is often used alongside abrasion testing.

In accordance with international standards, a comma (",") is used as the decimal marker throughout this document.

---

Test Pieces
4.1 Type and Preparation:

• Test pieces must be **cylindrical** in shape.
• The diameter should be **(16 ± 0.2) mm**.
• The minimum thickness should be **6 mm**.
• A **hardened hollow drill** (referenced in the standard as "Figure 1") shall be used to prepare the test pieces.
• The test samples should be conditioned at **23°C ± 2°C** and 50% relative humidity for at least **16 hours** before testing.

---

Test Methodology
The test determines the volume loss of a rubber sample when exposed to a controlled abrasive surface. The material's abrasion resistance is measured by calculating the volume loss after a standardized wear cycle.

1. Testing Equipment:

• Abrasion testing machine with a rotating drum covered with a standard abrasive sheet.
• Standardized test specimen holder to ensure uniform pressure application.
• Precision balance (accuracy of **0.001 g**) to measure mass loss.
• Thickness gauge or micrometer (accuracy **±0.01 mm**) to measure initial and final dimensions.

2. Test Procedure:

• The test specimen is pressed against the rotating abrasive drum at a constant pressure.
• A predefined load force (usually **10 N or 5 N**, depending on the application) is applied to the sample.
• The drum rotates at a fixed speed (typically **40 revolutions per minute (rpm)**).
• The rubber sample moves laterally across the drum to ensure uniform wear.
• After a specified number of cycles (typically **40 meters of total movement**), the test is stopped.
• The worn rubber sample is weighed, and the volume loss is calculated using the material's density.

3. Calculating Abrasion Resistance:
The abrasion resistance is expressed as volume loss per unit of distance traveled:

Abrasion Volume Loss (mm³) = (Mass Loss (g) / Density (g/cm³)) × 1000
Alternatively, the abrasion resistance index can be calculated by comparing the test sample's performance to a reference compound with known wear properties.

---

Factors Affecting Test Results
Several factors can influence the abrasion resistance of rubber materials:

• Material Composition: The type of rubber (e.g., natural rubber, nitrile, EPDM, silicone) affects abrasion resistance.
• Filler Content: The presence of reinforcing fillers like carbon black or silica enhances wear resistance.
• Curing Process: Over- or under-curing can impact the material's durability.
• Test Conditions: Variations in load, speed, and test duration can influence results.
• Surface Texture: Rougher surfaces increase material loss during testing.

---

Pass/Fail Criteria and Industry Requirements
Acceptable limits for abrasion resistance depend on the intended application:

• Automotive Tires: ≤ 150 mm³ volume loss
• Industrial Conveyor Belts: ≤ 120 mm³ volume loss
• Footwear Soles: ≤ 200 mm³ volume loss
• Sealing Gaskets: ≤ 100 mm³ volume loss

Manufacturers use these benchmarks to classify rubber compounds and ensure compliance with durability standards.

---

Significance of DIN 53516 in Industrial Applications
DIN 53516 helps manufacturers:

• Optimize rubber formulations to enhance abrasion resistance.
• Ensure consistent quality in high-wear applications.
• Reduce material costs by selecting the most durable compounds.
• Improve product lifespan and customer satisfaction.

For industries where rubber durability is critical (e.g., automotive, mining, mechanical engineering), adherence to DIN 53516 ensures reliable material selection and long-term performance.

---

Conclusion
DIN 53516 provides a standardized method for evaluating abrasion resistance in rubber and elastomers. It is widely used for material selection, quality control, and product development. While the test results provide valuable insights, real-world conditions should also be considered when assessing material durability.