--- PAGE 1 --- /Fainplast compounds DNV•GL ISO 9001 ISO 140013 TECHNICAL INFORMATION HALOGEN FREE COMPOUNDS HF 417 May 2015 THERMOPLASTIC HALOGEN FREE, FLAME RETARDANT AND LOW SMOKE EMISSION COMPOUND, FOR CABLE INSULATION AND SHEATING Description HF 417 is a thermoplastic, flame retardant, and halogen free compound on polyolefinic basis. It can be used for the production of energy, signal and control cables. Range material operating temperatures: -25°C(fixed -25°C(fixed °C. The properties of this compound comply with the requirements of EN 50363-0 type M1, EN 50363-7 type TI7, IEC 60502 ST8, VDE 0207 Part 24 type HM2-HM4 ,BS 7655 type LTS1-LTS2-LTS3-LTS4, EN 50290-2-27, UNE 21123-4:2010 - ANNEX A-Table1 type DMZ-E, IEC 60092-359 type SHF1. Technical characteristics Property Test method Unit Typical Value Density ISO 1183 g/cm3 1.50 Hardness at 15" ISO 868 Shore D Tensile strength ISO 527 N/mm? 12.0 Elongation at break 180 Oxygen Index ISO 4589 % Oг Hot pressure test at 90 °C IEC 60811 < 50 Melt Flow Index (150 °C/21.6Kg) ISO 1133 g/10 min 3,5 Volume Resistivity 20 C (Alternating Polarity Method) ASTM D257 Electrodes 2-cm 1. 1015 Water absorption mg/cm? Emission of Halogenidric acids EN 50267-2-1/IEC 60754-1 < 0.5 > 4.3 Conductivity HS/mm < 10 Temperature Index > 330 Ozone Resistance EN 50396:2007-8.1 A,B No Cracks Optical density of smoke EN 61034-2 % trasmittance > 80 Fluorine content EN 60684-2 < 0.1 Cold flex ISO 458-2 -18+2 The typical values reported in the table have been obtained from measurements made on extruded samples or pressed plates The description and figures contained herein are provided to customers as a general information for the purposes the product is Pag.1/2 TALE. Processing This thermoplastic compound has been designed for an easy processing, whilst maintaining good mechanical-thermal properties, and a medium-high LOI value. It can be processed using extruders with a low screw compression ratio (halogen free or PVC type), and with a temperature profile as that given below, which is however indicative, as it may depend on the equipment design adopted. Zone 1 130 - 150 Zone 3 Zone 4 Collar Head 140 - 160 150 - 165 Die 150 - 170 Storage The thermoplastic compound must be stored at ambient temperature (not exceeding 30°C) in closed and unbroken bags, in order to avoid exposure to sunlight and moisture. Long stocking time may negatively affect the quality of the material. Therefore it shall be used within 3 months from the compounding date. After this time it's necessary to dry the material before extrusion. Packaging Available in 25 Kg PE bags, big bags or oktabins of 1250 Kg on wooden pallet Our technical service is at your disposal, for further information and assistance. Faraotti Industrie Plastiche Srl Zona Ind.le Campolungo Il fase info@fainplast.com www.fainplast.com intended for. These reflect FAINPLAST knowledge at the time of publication. By the information contained herein FAINPLAST won't release any warranty and/or give any suggestion on the use of the product, or grant any franchise on existing patents. The end-user, transformer shall always check the specific suitability of the product for the purposes it is intended for and its compatibility with process specifications. This document does not form part of any contract with customer. Pag.2/2 [[VERIFIED EXTRACTION ADDITIONS]] < 5.0 ISO 4589-3