OP 10
WO-2026-000015-010-OP060-22
OP060 | Insulation Extrusion
Work Centre: |
Machine: F02-M04 | XLPE Insulation Line
Planned
Start:
Finish:
Qty: 3000.000000 m
Target Speed
120 m/min
Output / Semi-Finished
Insulated Conductor
Output Qty
1000 m
Setup / Duration
45 min / 30 min
Scrap
1 %
TECHNICAL / ENGINEERING PARAMETERS
| Parameter | Required / Target | Min | Max | Unit | Remarks |
| Process Type | Pressure | | | | |
| Material Standard | XLPE IEC 60502-1 | | | | |
| Color | reD | | | | |
| Color Masterbatch Ratio (%) | 3 | | | % | |
| Color Masterbatch Type | XLPE | | | | |
| Catalyst Ratio (%) | 3 | 2 | 4 | % | |
| Anti-Rodent Additive Ratio (%) | 3 | 2 | 4 | % | |
| Anti-Termite Additive Ratio (%) | 3 | 2 | 4 | % | |
| Flame-Retardant Additive Ratio (%) | | | | % | |
| Foaming Additive Ratio (%) | | | | % | |
| Nominal Wall Thickness (mm) | 0.7 | | | mm | |
| Minimum Point Wall Thickness (mm) | 0.54 | | | mm | |
| Nominal Diameter (mm) | 15 | | | mm | |
| Minimum Diameter (mm) | 12 | | | mm | |
| Maximum Diameter (mm) | 15 | | | mm | |
| Manufacturing Wall Thickness (mm) | 0.7 | | | mm | |
| Manufacturing Minimum Wall Thickness (mm) | 0.6 | | | mm | |
| Manufacturing Maximum Wall Thickness (mm) | 0.75 | | | mm | |
| Material Weight (kg/km) | 100 | | | kg/km | |
| Manufacturing Nominal Diameter (mm) | 13 | | | mm | |
| Manufacturing Minimum Diameter (mm) | 12 | | | mm | |
| Manufacturing Maximum Diameter (mm) | 15 | | | mm | |
| Insulation Input Diameter | | | | | |
| Maximum Point Wall Thickness (mm) | | | | mm | |
| Insulation Resistance (MΩ·km) | | | | Mohm/km | |
| Standard Minimum Diameter | | | | | |
| Standard Maximum Diameter | | | | | |
| Insulation Marking | | | | | |
| Note | | | | | |
| Tensile Strength / Elongation Values | | | | | |
PRODUCTION PROCESS PARAMETERS
| Parameter | Required / Target | Min | Max | Unit | Remarks |
| Extruder Zone Temperatures | | | | °C | |
| Head Temperature | | | | °C | |
| Screw Speed | | | | rpm | |
| Line Speed | | | | m/min | |
QUALITY / TEST PARAMETERS
| Parameter | Required / Target | Min | Max | Unit | Remarks |
| Minimum Thickness | | | | mm | |
| Spark Test Voltage | | | | kV | |
| Insulated Core OD | | | | mm | |
RAW MATERIALS / COMPONENTS — THIS OPERATION ONLY
| Material Code | Material Name | BOM Qty / Output | Calculated WO Qty | Unit | Role | Scrap % | Notes |
| CMP-LSZH-001 | LSZH Insulation Compound | 45345 | 136035000 | kg | | 0% | |
| CMP-LSZH-001 | LSZH Insulation Compound | 34543 | 103629000 | kg | | 0% | |
| CMP-LSZH-001 | LSZH Insulation Compound | 5435 | 16305000 | kg | | 0% | |
| CMP-LSZH-001 | LSZH Insulation Compound | 5345 | 16035000 | kg | | 0% | |
| CMP-LSZH-001 | LSZH Insulation Compound | 453445 | 1360335000 | kg | | 0% | |
Operator
Name / Sign:
Actual Start / Stop
Actual Output / Scrap
QC / Supervisor
Name / Sign:
OP 20
WO-2026-000015-020-OP090-23
OP090 | Cabling / Lay-up
Work Centre: |
Machine: F01-M03 | Rigid Strander
Planned
Start:
Finish:
Qty: 3000.000000 m
Target Speed
3000 m/min
Output / Semi-Finished
bukulu dmar asd
Output Qty
m
Setup / Duration
45 min / 45 min
Scrap
1 %
TECHNICAL / ENGINEERING PARAMETERS
| Parameter | Required / Target | Min | Max | Unit | Remarks |
| Lay Type | damar bukum | | | | |
| Lay Direction | sag | | | | |
| Minimum Lay Length | 232 | 232 | 23 | | |
| Nominal Lay Length | 232 | 23 | 23 | | |
| Maximum Lay Length | 23 | | 23 | | |
| Lay Ratio | 12 | | | | |
| Minimum Diameter | 23 | | | | |
| Nominal Diameter | 23 | | 23 | | |
| Maximum Diameter | | | | | |
| Filler Cord Count | | | | | |
| Filler Cord Diameter | | | | | |
| Dummy Core Count | 23 | | 23 | | |
| Dummy Core Diameter | | | 23 | | |
| Filler Cord Material | 23 | | | | |
| Filler Cord Weight | | | | | |
| Yarn Material | | | | | |
| Yarn Weight | 23 | | | | |
| Color and Number Sequence | | | | | |
| Process Type | | | | | |
| Material Standard | 23 | | | | |
| Color | | | | | |
| Color Masterbatch Ratio (%) | | | | % | |
| Color Masterbatch Type | 23 | | | | |
| Input Diameter | | | | | |
| Manufacturing Wall Thickness (mm) | | | | mm | |
| Manufacturing Minimum Wall Thickness (mm) | | | | mm | |
| Manufacturing Maximum Wall Thickness (mm) | | | | mm | |
| Manufacturing Nominal Diameter (mm) | | | | mm | |
| Manufacturing Minimum Diameter (mm) | | 23 | | mm | |
| Manufacturing Maximum Diameter (mm) | 2323 | | | mm | |
| Standard Minimum Diameter | 2323 | | | | |
| Standard Maximum Diameter | 23 | | | | |
| Material Weight (kg/km) | 23 | 23 | | kg/km | |
| Note | | | | | |
PRODUCTION PROCESS PARAMETERS
| Parameter | Required / Target | Min | Max | Unit | Remarks |
| Line Speed | | | | m/min | |
QUALITY / TEST PARAMETERS
| Parameter | Required / Target | Min | Max | Unit | Remarks |
| Assembly OD | | | | mm | |
RAW MATERIALS / COMPONENTS — THIS OPERATION ONLY
—
Operator
Name / Sign:
Actual Start / Stop
Actual Output / Scrap
QC / Supervisor
Name / Sign: