OP 10
WO-2026-000152-010-OP010-165
OP010 | Rod Breakdown / Wire Drawing
Work Centre: |
Machine: F03-M01 | Rod Breakdown Machine
Planned
Start:
Finish:
Qty: 339.686633 kg
Target Speed
4 m/min
Output / Semi-Finished
Output Qty
1000 kg
Setup / Duration
30 min / 15 min
Scrap
1 %
TECHNICAL / ENGINEERING PARAMETERS
| Parameter | Required / Target | Min | Max | Unit | Remarks |
| Material Type | copper | | | | |
| Construction | | | | | |
| Conductor Stranding Type | | | | | |
| Layer Diameters for Rolling | | | | | |
| Lay Direction | 33 | | | | |
| Diameter | 33 | 5 | 333 | | |
| Nominal Lay Length | | | 33 | | |
| Maximum Lay Length | 3 | | 3 | | |
| Theoretical Conductor Resistance | 3 | | 3 | | |
| Maximum Conductor Resistance | 3 | 3 | | | |
| Maximum Standard Resistance | 3 | | 3 | | |
| Material Weight (kg/km) | 3 | | 3 | kg/km | |
| Note | | | | | |
PRODUCTION PROCESS PARAMETERS
| Parameter | Required / Target | Min | Max | Unit | Remarks |
| Inlet Diameter | 333 | 33 | 33 | mm | |
| Outlet Diameter | 3 | 3 | | mm | |
| Line Speed | 3333 | 33 | 3 | m/min | |
| Annealer Current | 333 | 3 | 33 | A | |
QUALITY / TEST PARAMETERS
| Parameter | Required / Target | Min | Max | Unit | Remarks |
| Conductor Resistance | 33 | 3 | 33 | ohm/km | |
| Wire Diameter | 333333 | 33333 | 3 | mm | |
RAW MATERIALS / COMPONENTS — THIS OPERATION ONLY
| Material Code | Material Name | BOM Qty / Output | Calculated WO Qty | Unit | Role | Scrap % | Notes |
| BCL1 N-N000-0001-8000012Y | Bare Copper | IEC | Round/Bunch | IEC 60228 Class 1 | NOT | NOT | 1 x 8 mm | Lay NOT | 50 mm² | 1000 | 343.083499 | kg | | 1% | |
Operator
Name / Sign:
Actual Start / Stop
Actual Output / Scrap
QC / Supervisor
Name / Sign: