OP 10
WO-2026-000102-010-OP090-112
OP090 | Cabling / Lay-up
Work Centre: |
Machine: F02-M03 | Rigid Strander
Planned
Start:
Finish:
Qty: 1000.000000 m
Target Speed
144 m/min
Output / Semi-Finished
Output Qty
m
Setup / Duration
34324 min / 131 min
Scrap
0 %
TECHNICAL / ENGINEERING PARAMETERS
| Parameter | Required / Target | Min | Max | Unit | Remarks |
| Lay Type | 234324 | | | | |
| Lay Direction | 234324 | | | | |
| Minimum Lay Length | 23432 | 4324 | 234 | | |
| Nominal Lay Length | | | | | |
| Maximum Lay Length | | | | | |
| Lay Ratio | | | 234 | | |
| Minimum Diameter | | | | | |
| Nominal Diameter | | | | | |
| Maximum Diameter | | | | | |
| Filler Cord Count | | | | | |
| Filler Cord Diameter | | | | | |
| Dummy Core Count | | | | | |
| Dummy Core Diameter | | | | | |
| Filler Cord Material | | | | | |
| Filler Cord Weight | | | | | |
| Yarn Material | | | | | |
| Yarn Weight | | | | | |
| Color and Number Sequence | | | | | |
| Process Type | 4324 | | | | |
| Material Standard | 234 | | | | |
| Color | | | | | |
| Color Masterbatch Ratio (%) | | | | % | |
| Color Masterbatch Type | | | | | |
| Input Diameter | | | | | |
| Manufacturing Wall Thickness (mm) | | | | mm | |
| Manufacturing Minimum Wall Thickness (mm) | | | | mm | |
| Manufacturing Maximum Wall Thickness (mm) | | | | mm | |
| Manufacturing Nominal Diameter (mm) | | | | mm | |
| Manufacturing Minimum Diameter (mm) | | | | mm | |
| Manufacturing Maximum Diameter (mm) | 234 | | 234 | mm | |
| Standard Minimum Diameter | | | | | |
| Standard Maximum Diameter | 42 | 4234 | | | 42334 |
| Material Weight (kg/km) | | | 4 | kg/km | |
| Note | | | | | |
PRODUCTION PROCESS PARAMETERS
| Parameter | Required / Target | Min | Max | Unit | Remarks |
| Line Speed | | | | m/min | |
QUALITY / TEST PARAMETERS
| Parameter | Required / Target | Min | Max | Unit | Remarks |
| Assembly OD | | | | mm | |
RAW MATERIALS / COMPONENTS — THIS OPERATION ONLY
—
Operator
Name / Sign:
Actual Start / Stop
Actual Output / Scrap
QC / Supervisor
Name / Sign:
OP 20
WO-2026-000102-020-OP070-113
OP070 | CV / Vulcanization
Work Centre: |
Machine: F03-M08 | Outer Sheathing Line
Planned
Start:
Finish:
Qty: 1000.000000 m
Target Speed
45 m/min
Output / Semi-Finished
Output Qty
1000 m
Setup / Duration
4545 min / 4545 min
Scrap
1 %
TECHNICAL / ENGINEERING PARAMETERS
| Parameter | Required / Target | Min | Max | Unit | Remarks |
| Process Type | | | | | |
| Material Standard | | | | | |
| Color | | | | | |
| Color Masterbatch Ratio (%) | | | | % | |
| Color Masterbatch Type | | | | | |
| Catalyst Ratio (%) | | | | % | |
| Insulation Input Diameter | | | | | |
| Nominal Wall Thickness (mm) | | | | mm | |
| Minimum Point Wall Thickness (mm) | | | | mm | |
| Maximum Point Wall Thickness (mm) | | | | mm | |
| Manufacturing Nominal Diameter (mm) | | | | mm | |
| Manufacturing Minimum Diameter (mm) | | | | mm | |
| Manufacturing Maximum Diameter (mm) | | | | mm | |
| Insulation Resistance (MΩ·km) | | | | Mohm/km | |
| Standard Minimum Diameter | | | | | |
| Standard Maximum Diameter | | | | | |
| Material Weight (kg/km) | | | | kg/km | |
| Insulation Marking | | | | | |
| Note | | | | | |
| Tensile Strength / Elongation Values | | | | | |
PRODUCTION PROCESS PARAMETERS
| Parameter | Required / Target | Min | Max | Unit | Remarks |
| Curing Pressure | | | | bar | |
| Curing Temperature | | | | °C | |
| Line Speed | | | | m/min | |
QUALITY / TEST PARAMETERS
| Parameter | Required / Target | Min | Max | Unit | Remarks |
| Hot Set Elongation | | | | % | |
RAW MATERIALS / COMPONENTS — THIS OPERATION ONLY
| Material Code | Material Name | BOM Qty / Output | Calculated WO Qty | Unit | Role | Scrap % | Notes |
| CMP-RUB-002 | CPE Rubber Sheathing Compound | 100 | 105 | kg | | 5% | |
Operator
Name / Sign:
Actual Start / Stop
Actual Output / Scrap
QC / Supervisor
Name / Sign: