Protection for copper cables
In addition to mechanical protections, special protections can be considered for specific installations:
Moisture barrier
If moisture barrier is specified it shall be applied over the total cabling of elements and is possible to choose two alternatives:
Water swellable tapes
(http://cavicelstageadmin.espero.it/upload/img/water.png)
Laminated sheath, consisting of a longitudinal overlapped metallic foil, bonded to an extruded sheath.
(http://cavicelstageadmin.espero.it/upload/img/laminated.png)
Lead Sheath
It is applied between two other sheaths and is the best
protection against aggressive chemicals. This is an expensive solution, increases weight and bending radius. It presents poor vibration resistance and normally an armour is required to protect it from crushing.
(http://cavicelstageadmin.espero.it/upload/img/lead-sheat.png)
Hi-Pack
It is an alternative to Lead Sheath and is composed by a longitudinal overlapped aluminium copolimer coated tape bonded to HDPE jacket and additional special alloy of polyamide/polypropylene sheath.
Excellent protection against corrosion and humidity.
Excellent impact resistance that in some cases prevents the use of the armour
This protection has a lower weight compared to lead sheath, cables have a smaller diameter, with a reduction of costs.
Hi-Pack is the right choice to protect the environment.
(http://cavicelstageadmin.espero.it/upload/img/hi-pack.png)
source from cavicel