• Welcome to CableDataSheet, Cable and Wire Technical Consulting Service.
 

News:

You are not allowed to view links. Register or Login
You are not allowed to view links. Register or Login
You are not allowed to view links. Register or Login
You are not allowed to view links. Register or Login
Tacettin İKİZ



Main Menu

New XLPE Control Cable Joins HELUKABEL Product Portfolio

Started by Eadwyn ECCLESTONE, September 19, 2016, 10:12:25 AM

Previous topic - Next topic

Eadwyn ECCLESTONE


                                                                                                               
New XLPE Control Cable Joins HELUKABEL Product Portfolio

HELUKABEL, one of the world's leading cable manufacturers, has announced the addition of a cross-linked (thermoset) polyethylene (XLPE) insulated control cable that is suited for industrial equipment manufacturers in Canada and those that export to the United States.

The new TRAY X is a NFPA 79-2012 conformant, tray-rated, flexible control power cable suitable for all machinery in tool and plant construction, and can be installed in dry, humid and damp environments, in pipes, underground, and for open, unprotected installation from the cable rack to industrial plant machinery. They are 600 V and WTTC 1000 V rated allowing them to be used in 1 kV wind turbine cable tray applications. Additionally, it is CE approved for machine builders exporting to other European countries.

The XLPE insulation is ideal for applications that require long cable runs due to its low capacitance. A higher current load rating is possible due to the conductor temperature resistance of 105°C. This enables a smaller cross section to be used when designing electrical networks in machines or systems. In addition to the resulting lower costs and use of copper, the much smaller outer diameter offers advantages for installation in tight spaces due to an increase in the cable's maximum bending radius.

Additional TRAY X specifications:

    Temperature Range: -40°C to +105°C
    Nominal Voltage: TC – 600V / WTTC – 1000V
    Min. Bending Radius: 10x the cable O.D.
    Approvals: UL – TC-ER (AWG 18 & larger), ITC-ER, PLTC-ER (AWG 12 and smaller), Type WTTC (AWG 18 & larger), Type XHHW-2 (AWG 14 & larger) 13, 44, 1202, 1277, 1581, 2277, 2250, AWM 2586 – 105C 600V, NFPA 79 2012, Oil Res I/II, 90°C dry / wet, Class 1 Div. 2 per NEC Art. 336, 392, 501 / CSA – c(UL) CIC-TC FT4 (AWG 18 & larger) CSA AWM I/II A/B FT4

It is currently available in sizes 20 AWG – 500 kcmil with various conductor configurations. For customers working in facilities where high levels of electromagnetic interference are prevalent, a shielded variant is available upon request.

source :

Document echo ' ';